Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen

被引：5
|
作者：
Vandellos, Thomas [1 ]
Hautier, Mathieu [1 ]
Carrere, Nicolas [1 ]
Huchette, Cedric [1 ]
机构：
[1] Off Natl Etud & Rech Aerosp, F-92322 Chatillon, France
来源：
ENGINEERING FRACTURE MECHANICS | 2012年 / 96卷
关键词：
Delamination; Fiber reinforced materials; Toughness testing; Fracture mechanics; I+II INTERLAMINAR FRACTURE; MODE-II; DELAMINATION FRACTURE; COMPOSITES; TOUGHNESS; BEAM;
D O I：
10.1016/j.engfracmech.2012.09.026
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Delamination is one of the most critical damage mechanisms in laminated composites. A fracture test, referenced in the following as Tensile Flexure test on Notched Specimen, is proposed in this work to characterize the propagation of delamination. After the description of the experimental procedure, experimental results on carbon/epoxy specimens are presented to describe the capabilities and advantages of the test to characterize delamination. Then, a new propagation law is proposed to describe the evolution of the fracture toughness. Finally, a non-deterministic analysis is performed to determine the influence of the measured parameters on the toughness identification. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：641 / 655
页数：15
相关论文
共 50 条
  • [31] Internal Notched Flexure (INF) Test for Measurement of Mode II Interlaminar Fracture Toughness of Fiber Composites
    Belay, Tsegay
    Ben Jar, P. -Y.
    Cheng, J. -J. Roger
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2014, 3 (03) : 519 - 541
  • [32] Design and Development of a Biaxial Tensile Test Device for a Thin Film Specimen
    Namazu, Takahiro
    Nagai, Yuji
    Naka, Nobuyuki
    Araki, Nozomu
    Inoue, Shozo
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (01):
  • [33] Determination of Averaged Stress Triaxiality of Notched Tensile Test Specimen using Shape Parameter and Material Property
    Jeong, Sang Seop
    Jung, Hyun-woo
    Kim, Yun Jae
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2020, 44 (06) : 429 - 434
  • [34] ONSET OF NECKING OF TENSILE TEST SPECIMEN FROM TEMPERATURE AND RATE DEPENDENT MATERIAL
    BRUHNS, OT
    ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 1978, 58 (06): : T199 - T200
  • [35] Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture
    Liu, C.
    Lovato, M. L.
    Clarke, K. D.
    Alexander, D. J.
    Blumenthal, W. R.
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2018, 120 : 179 - 198
  • [36] Establishing methodology to predict fracture behaviour of piping components by numerically predicting specimen fracture data using tensile specimen test
    Saxena, Sanjeev
    Ramakrishnan, N.
    Chouhan, J. S.
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (07) : 1058 - 1072
  • [37] A SIMPLE METHOD TO DETERMINE DUCTILE FRACTURE STRAIN IN A TENSILE TEST OF PLANE SPECIMEN'S
    Kut, S.
    METALURGIJA, 2010, 49 (04): : 295 - 299
  • [38] Critical strain energy release rate test and its interrelated law of rock parameters
    Lin, Hang
    Li, Jiangteng
    Cao, Ping
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2013, 44 (02): : 714 - 717
  • [39] RELATIONSHIP OF TOUGHNESS, FRACTURE INITIATION ENERGY AND SPECIMEN DEFLECTION IN A CHARPY TEST
    DATTA, KP
    WOOD, WE
    JOURNAL OF METALS, 1979, 31 (12): : 106 - 106
  • [40] Effect of Tensile Test Specimen Thickness on Deformation Energy for Duplex Stainless Steel
    Hirashima, Takuya
    Aramaki, Masatoshi
    Yamamoto, Masayuki
    Yasuda, Kyono
    Munetoh, Shinji
    Furukimi, Osamu
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2015, 101 (05): : 34 - 40
12345