COMPARISION OF THE MICROSTRUCTURE AND TEXTURE EVOLUTION IN AA1050 ALUMINUM ALLOY SHEETS PRODUCED BY THE DC AND CC METHODS

被引：0

作者：

Otomar, Heber Pires ^{[1
]}

Plaut, Ronald Lesley ^{[2
]}

机构：

[1] CBA, R&D Dept Votorantim Met, Aluminio, SP, Brazil

[2] Univ Sao Paulo, EPUSP PMT, Sao Paulo, Brazil

来源：

LIGHT METALS 2012 | 2012年

关键词：

Aluminum Alloys; Mechanical Working; Heat Treatment; Texture; COMMERCIAL PURITY ALUMINUM; CONTINUOUS CAST;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This study aims to compare, on an industrial scale, of the effect of the direct chill (DC) and continuous casting (CC) fabrication processes of AA1050 rolled and annealed sheets. Characterization of their microstructure and texture evolution from the as-cast condition up to the end condition of a deep-drawn cup was carried out. Stamping tests were performed to identify which process presents best performance. Different microstructures were obtained for the studies processes: the DC material was more homogeneous, both in terms of intermetallic distribution and grain size. The mechanical properties of the CC material were slightly higher than those for the DC material. Forming Limit Diagram (FLD) of the homogenized CC material presented the best results.

引用

页码：233 / 238

页数：6

共 50 条

[41] Elucidation of the Anodization and Silver Incorporation Impact on the Surface Properties of AA1050 Aluminum Alloy
Kozhukharov, S.
Girginov, Ch.
Tsanev, A.
Petrova, M.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2019, 166 (10) : C231 - C242
[42] The effect of nickel on alloy microstructure and electrochemical behaviour of AA1050 aluminium alloy in acid and alkaline solutions
Garcia-Garcia, F. J.
Skeldon, P.
Thompson, G. E.
Smith, G. C.
ELECTROCHIMICA ACTA, 2012, 75 : 229 - 238
[43] Experimental investigation of strain path effects on mechanical properties, forming limit curves, and texture evolution of AA1050 aluminum sheet
Rouzbeh, A.
Atifeh, S. M.
Sedighi, M.
Hashemi, R.
JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2023, 30 (08) : 2472 - 2484
[44] Impact of Welding Processing Parameters on The Microstructure Grain Refinement and Hardness Behavior of The Aluminum AA1050
Hassan, Ahmed Saad
Moustafa, Essam B.
Mohamed, S. S.
EGYPTIAN JOURNAL OF CHEMISTRY, 2023, 66 (12): : 291 - 302
[45] A comparison of the evolution of microstructure and texture in DC cast and strip cast aluminum alloy AA5182 hot bands
Liu, YL
Liu, Y
Morris, JG
HOT DEFORMATION OF ALUMINUM ALLOYS II, 1999, : 61 - 71
[46] Enhancement of fracture forming limit by crystallographic texture reformation of AA1050 sheets in Single Point Incremental Forming
Shrivastava, Parnika
Tandon, Puneet
38TH INTERNATIONAL DEEP DRAWING RESEARCH GROUP ANNUAL CONFERENCE (IDDRG 2019), 2019, 651
[47] ANALYSIS OF MICROSTRUCTURE AND MECHANICAL PROPERTIES CHANGES IN AA1050 ALUMINUM SUBJECTED TO ECAP AND KoBo PROCESSES
Bogucki, R.
Sulikowska, K.
Bieda, M.
Ostachowski, P.
Sztwiertnia, K.
ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (04) : 3063 - 3068
[48] Microstructure and mechanical properties of ARB-processed AA1050/AA5052 multilayer laminate sheets during cryorolling
Song, Lingling
Xie, Zhibao
Gao, Haitao
Kong, Charlie
Yu, Hailiang
MATERIALS LETTERS, 2022, 307
[49] Cold Rolling Effect on Mechanical Properties and Fracture Toughness Behavior of AA1050 Aluminum Alloy
Taktak, Wafa
Haddar, Nader
Elleuch, Riadh
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2024, 45 (02): : 187 - 194
[50] MICROSTRUCTURE AND TEXTURE EVOLUTION IN HOT ROLLED AA-3004 ALUMINUM-ALLOY
SAIMOTO, S
KAMAT, RG
MATERIALS SCIENCE AND TECHNOLOGY, 1992, 8 (10) : 869 - 874

← 1 2 3 4 5 →