Validation of RELAP5/MOD3.2 model of VVER440 on reactor scram transient

被引：6
|
作者：
Groudev, P [1 ]
Stefanova, A [1 ]
机构：
[1] Bulgarian Acad Sci, Inst Nucl Res & Nucl Energy, BU-1784 Sofia, Bulgaria
来源：
PROGRESS IN NUCLEAR ENERGY | 2006年 / 48卷 / 02期
关键词：
VVER; NPP; thermal hydraulic code; experimental data; validation; RELAP5;
D O I：
10.1016/j.pnucene.2005.08.001
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
This paper describes validation of a computer model that has been developed for VVER 440 Nuclear Power Plant (NPP) for use with RELAP5/M0D 3.2 computer code in the analysis of the following transient: 'Reactor SCRAM'. This validation is a process that compares the analytical results obtained by RELAP5/MOD3.2 model of the VVER 440 with the experimental transient data received from Kozloduy NPP, Unit #2. The model of VVER 440 was developed at the Institute for Nuclear Research and Nuclear Energy for analyses of operational occurrences, abnormal events, and design basis scenarios. It will provide a significant analytical capability for the Bulgarian technical specialists located at the Kozloduy NPP. The criteria used in selecting transient are: importance to safety, availability and suitability of data followed by suitability for RELAP5 code validation. The comparisons between the RELAP5 results and the test data indicate good agreement. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：146 / 154
页数：9
相关论文
共 50 条
  • [21] Assessment of RELAP5/MOD3.2 for startup transients in a natural circulation test facility
    Shi, Shanbin
    Zhu, Qingzi
    Sun, Xiaodong
    Ishii, Mamoru
    ANNALS OF NUCLEAR ENERGY, 2018, 112 : 257 - 266
  • [22] RELAP5/MOD3.2与MOD3.3临界流模型对比及分析
    彭军
    核标准计量与质量, 2019, (03) : 39 - 44
  • [23] RELAP5/MOD3.2 investigation of reactor vessel YR line capabilities for primary side depressurization during the TLFW in VVER 1000/V320
    Gencheva, RV
    Stefanova, AE
    Groudev, PP
    ANNALS OF NUCLEAR ENERGY, 2005, 32 (12) : 1407 - 1434
  • [24] Investigation of station blackout scenario in VVER440/v230 with RELAP5 computer code
    Gencheva, Rositsa Veselinova
    Stefanova, Antoaneta Emilova
    Groudev, Pavlin Petkov
    NUCLEAR ENGINEERING AND DESIGN, 2015, 295 : 441 - 456
  • [25] Assessment of Modified RELAP5 MOD3.2 Against LBE Natural Circulation Test Loops
    Lv, Yufeng
    Liu, Xingmin
    Li, Weihan
    Guo, Chunqiu
    Zhou, Zhiwei
    FRONTIERS IN ENERGY RESEARCH, 2021, 9
  • [26] Validation of RELAP5/MOD3.2 code for simulating pool boiling heat transfer outside vertical tube bundle
    Li, Ya, 1600, Atomic Energy Press (48):
  • [27] RELAP5/MOD3.2 sensitivity calculations of loss-of-feed water (LOFW) transient at Unit 6 of Kozloduy NPP
    Pavlova, MP
    Groudev, PP
    Stefanova, AE
    Gencheva, RV
    NUCLEAR ENGINEERING AND DESIGN, 2006, 236 (03) : 322 - 331
  • [28] Simulation of two loss-of-flow transients in a VVER-1000 nuclear power plant with RELAP5/MOD3.2 system code
    Hassan, YA
    Moscalu, DR
    NUCLEAR TECHNOLOGY, 2000, 129 (01) : 82 - 92
  • [29] Uncertainty in RELAP5/MOD3.2 calculations for interfacial drag in downward two-phase flow
    Clark, Collin
    Schlegel, Joshua P.
    Hibiki, Takashi
    Ishii, Mamoru
    Kinoshita, Ikuo
    ANNALS OF NUCLEAR ENERGY, 2016, 94 : 230 - 240
  • [30] Validation of RELAP5/MOD3.2 code for simulating nucleate pool boiling heat transfer outside vertical tube bundle
    20160902019356
    (1) Harbin Engineering University, Harbin, Heilongjiang, China, 1600, et al.; GLSEQ, LLC/SCI Technologies. Inc; Hitachi-GE Nuclear Energy, Ltd.; Mitsubishi Heavy Industries, Ltd. (MHI); Toshiba Corporation; Westinghouse Electric Company (American Society of Mechanical Engineers (ASME), United States):
12345