Experimental and numerical fatigue crack growth of an aluminium pipe repaired by composite patch

被引：39

作者：

Zarrinzadeh, H. ^{[1
]}

Kabir, M. Z. ^{[1
]}

Deylami, A. ^{[1
]}

机构：

[1] Amirkabir Univ Technol, Dept Civil & Environm Engn, POB 158754413, Tehran, Iran

来源：

ENGINEERING STRUCTURES | 2017年 / 133卷

关键词：

Crack growth experiment; XFEM crack growth; Patch repaired pipe; Stress intensity factors; BONDED PATCH; NOTCHED CYLINDERS; FINITE-ELEMENT; FRACTURE; SHELLS; OPTIMIZATION; STRENGTH;

D O I：

10.1016/j.engstruct.2016.12.011

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In this study a cylindrical cracked aluminium pipe is considered. Fatigue crack growth behaviour of the pipe is observed through experimental tests. Stress intensity factors are computed for the pipe with an inclined crack under axial tensile load. Fatigue crack trajectory and also the crack growth curves versus number of cycles of load, are extracted. Validation of results is then achieved through the extended finite element method (XFEM). A stand-alone MATLAB programming package is developed to study such structures with 3D degenerated shell elements. The cracked pipe is finally repaired by glass/epoxy polymer composite and the effect of the patch is observed on the extension of fatigue life through experimental tests and the XFEM framework. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：24 / 32

页数：9

共 50 条

[41] Experimental and Numerical Study of the Effect of Patch Shape for Notched Cracked Composite Structure Repaired by Composite Patching
Amari, Khaoula
Berrahou, Mohamed
JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2022, 22 (03) : 1040 - 1049
[42] Experimental and Numerical Study of the Effect of Patch Shape for Notched Cracked Composite Structure Repaired by Composite Patching
Khaoula Amari
Mohamed Berrahou
Journal of Failure Analysis and Prevention, 2022, 22 : 1040 - 1049
[43] Fatigue crack growth in a pressurized pipe
Boukharouba, T
Gilgert, J
Pluvinage, G
ECF 11 - MECHANISMS AND MECHANICS OF DAMAGE AND FAILURE, VOLS I-III, 1996, : 1167 - 1172
[44] The role of patch hybridization on tensile response of cracked panel repaired with hybrid composite patch: experimental and numerical investigation
Makwana, Alpesh H.
Shaikh, A. A.
JOURNAL OF ADHESION, 2020, 97 (01): : 53 - 87
[45] Performance of patch repaired composite panels under fatigue loads
Darwish, Feras H.
Hamoush, Sameer
Shivakumar, Kinugal
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2006, 31 (2C) : 77 - 87
[46] Effect of patch length and elevated temperature on fatigue behaviour of repaired aluminium panels with a CFRP patch
Shinde, H. P.
Sonawane, Nikhil
Karnik, M. G.
Kumar, Prashant
JOURNAL OF ADHESION, 2023, 99 (10): : 1678 - 1694
[47] The impact of welding residual stresses on fatigue crack growth behaviour in aluminium alloy plates: a numerical and experimental investigation
Noghabi, Mohammad
Sattarifar, Iraj
Hosseini-Toudeshky, Hossein
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024,
[48] Numerical Simulation of Fatigue Crack Growth in Steel-Aluminium Transition Joint
Kowalski, Mateusz
Rozumek, Dariusz
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING 2019 (ICCMSE-2019), 2019, 2186
[49] Numerical and experimental analysis of residual stresses for fatigue crack growth
Wang, H
Buchholz, FG
Richard, HA
Jägg, S
Scholtes, B
COMPUTATIONAL MATERIALS SCIENCE, 1999, 16 (1-4) : 104 - 112
[50] Numerical and experimental analysis of residual stresses for fatigue crack growth
Institute of Applied Mechanics, University of Paderborn, D-33098 Paderborn, Germany
不详
Comput Mater Sci, 1-4 (104-112):

← 1 2 3 4 5 →