Fatigue Crack Growth in Cast and Wrought Aluminium Alloys

被引：0

作者：

Gavras, Anastasios ^{[1
]}

Spangenberger, Anthony ^{[1
]}

Lados, Diana ^{[1
]}

机构：

[1] Worcester Polytech Inst, Integrat Mat Design Ctr, Worcester, MA 01609 USA

来源：

LIGHT METALS TECHNOLOGY 2013 | 2013年 / 765卷

关键词：

Cast and wrought aluminium; Long and small fatigue crack growth; Design maps; PATHS;

D O I：

10.4028/www.scientific.net/MSF.765.574

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fatigue crack growth (FCG) behaviour of cast aluminium alloys with different strengthening mechanisms (A535, 319, A356, A390) and wrought aluminium alloys (6061) was investigated in this study. Among the various parameters that can affect the propagation of fatigue cracks, the initial flaw size and microstructure were studied and correlated. Long and small FCG tests at low and high positive stress ratios were conducted on these materials in room temperature air. The mechanisms of FCG at the microstructural scale were identified and will be compared and discussed. In addition, two-parameter design diagrams were constructed to link loading conditions to microstructural response and fracture modes determined from fractographic observations. Finally, a new methodology and tools that can be used to bridge the differences between small and long fatigue cracks were developed and will be presented.

引用

页码：574 / 579

页数：6

共 50 条

[21] Semi-solid forming of cast and wrought aluminium alloys
Niu, XP
Hu, BH
Hao, SW
Yee, FC
Pinwill, I
5TH INTERNATIONAL CONFERENCE ON SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, PROCEEDINGS, 1998, : 141 - 148
[22] Retardation of fatigue crack growth in aircraft aluminium alloys via laser heating - Numerical prediction of fatigue crack growth
Schnubel, D.
Huber, N.
COMPUTATIONAL MATERIALS SCIENCE, 2012, 65 : 461 - 469
[23] Fatigue crack growth and closure in fine-grained aluminium alloys
Venning, L.
Hogg, S. C.
Sinclair, I.
Reed, P. A. S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 428 (1-2): : 247 - 255
[24] Microstructural effects on fatigue crack growth of cast and forged TiAl alloys
Clemens, DR
Lobo, CI
Anton, DL
SUPERALLOYS 1996, 1996, : 555 - 560
[25] Microstructure dependent fatigue crack growth in aged hardened aluminium alloys
Borrego, LP
Costa, JM
Silva, S
Ferreira, JM
INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (12) : 1321 - 1331
[26] THE MECHANICAL PROPERTIES OF SOME WROUGHT AND CAST ALUMINIUM ALLOYS AT ELEVATED TEMPERATURES
THORPE, PL
TREMAIN, GR
RIDLEY, RW
JOURNAL OF THE INSTITUTE OF METALS, 1950, 77 (02): : 111 - 140
[27] Corrosion fatigue of cast aluminium- and cast magnesium alloys
Mayer, H
Papakyriacou, M
Stanzl-Tschegg, S
Tschegg, E
Zettl, B
Lipowsky, H
Rösch, R
Stich, A
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 1999, 50 (02): : 81 - 89
[28] Fatigue crack growth and life predictions under variable amplitude loading for a cast and wrought aluminum alloy
Glancey, CD
Stephens, RR
INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (01) : 53 - 60
[29] Fatigue crack growth behaviors in Al−Si−Mg sand cast alloys
Sang-Won Han
Sug-Won Kim
Metals and Materials International, 2004, 10 : 13 - 18
[30] Fatigue crack growth resistance and fracture toughness of selectively reinforced aluminium alloys
Milan, M
Bowen, P
ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 1009 - 1014

← 1 2 3 4 5 →