Design and testing of the 1.5 T superconducting solenoid for the BaBar Detector at PEP-II in SLAC

被引：6
|
作者：
O'Connor, TG [1 ]
Shen, S
Fabbricatore, P
Farinon, S
Musenich, R
Priano, C
Bell, RA
Berndt, M
Burgess, W
Craddock, W
Keller, L
Dormicchi, O
Moreschi, P
Penco, R
Valente, P
Valle, N
机构：
[1] Univ Calif Lawrence Livermore Natl Lab, Livermore, CA 94550 USA
[2] Ist Nazl Fis Nucl, I-16146 Genoa, Italy
[3] Stanford Linear Accelerator Ctr, Stanford, CA 94309 USA
[4] Ansaldo Energia, Genoa, Italy
来源：
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 1999年 / 9卷 / 02期
关键词：
D O I：
10.1109/77.783429
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The 1.5 Tesla superconducting solenoid is part of the BABAR Detector located in the PEP-II B-Factory machine at the Stanford Linear Accelerator Center. The solenoid has a 2.8 m bore acid is 3.7 m long. The two layer solenoid is wound with an aluminum stabilized conductor which is graded axially to produce a +/- 3% field uniformity in the tracking region. The 24 month fabrication, 3 month installation and 1 month commissioning of the solenoid were completed on time and budget. This paper summarizes the culmination of a 3 year design, fabrication and testing program of the BABAR superconducting solenoid, The work was completed by an international collaboration between Ansaldo, INFN, LLNL, and SLAG. Critical current measurements of the superconducting strand, cable and conductor, cool-down, operation with the thermo-siphon cooling, fast and slow discharges, and magnetic forces are discussed in detail.
引用
收藏
页码：847 / 851
页数：5
相关论文
共 50 条
  • [31] Modeling of the sparks in Q2-bellows of the PEP-II SLAC B-factory
    Novokhatski, A.
    Seeman, J.
    Sullivan, M.
    2007 IEEE PARTICLE ACCELERATOR CONFERENCE, VOLS 1-11, 2007, : 520 - 522
  • [32] New Q2-bellows absorber for the PEP-II SLAC B-factory
    Novokhatski, A.
    DeBarger, S.
    Ecklund, S.
    Kurita, N.
    Seeman, J.
    Sullivan, M.
    Weathersby, S.
    Wienands, U.
    2007 IEEE PARTICLE ACCELERATOR CONFERENCE, VOLS 1-11, 2007, : 523 - 525
  • [33] Design of the PEP-II low-energy ring
    Zisman, MS
    Yourd, RB
    Hsieh, H
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 533 - 535
  • [34] Design of the PEP-II low energy ring vacuum system
    Hunt, D
    Kennedy, K
    Stevens, T
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 2067 - 2068
  • [35] BABAR, an ambitious detector for CP violation measurements at PEP II beauty factory
    Wormser, G
    INTERNATIONAL EUROPHYSICS CONFERENCE ON HIGH ENERGY PHYSICS, 1999, : 1085 - 1090
  • [36] Conceptual design of a superconducting solenoid for a magnetic SSC detector
    Fast, R.W.
    Grimson, J.H.
    Kephart, R.D.
    Krebs, H.J.
    Stone, M.E.
    Theriot, D.
    Wands, R.H.
    Proceedings of the International Cryogenic Engineering Conference, 1988, (12):
  • [37] Some solved problems with the SLAC PEP-II B-Factory Beam-Position Monitor system
    Johnson, RG
    Smith, SR
    BEAM INSTRUMENTATION WORKSHOP 2000, 2000, 546 : 448 - 455
  • [38] Buildup of electron cloud in the PEP-II particle accelerator in the presence of a solenoid field and with different bunch pattern
    Cai, Y
    Pivi, M
    Furman, MA
    PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS, 2004, 7 (02): : 72 - 78
  • [39] Design of the PEP-II low-energy ring arc magnets
    Henderson, T
    Li, N
    Osborn, J
    Tanabe, J
    Yee, D
    Yourd, R
    Du, W
    Jiang, Y
    Sun, Y
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 1322 - 1324
  • [40] Low level RF system design for the PEP-II B factory
    Corredoura, P
    Claus, R
    Sapozhnikov, L
    Schwarz, H
    Tighe, R
    Ziomek, C
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 2672 - 2674
12345