A LOW-COST NITRIC OXIDE GAS SENSOR BASED ON BONDED GOLD WIRES

In this paper we report of a novel and very simple fabrication method for realizing amperometric gas sensors using conventional wire bonding technology. Working and counter electrodes are made of 360 vertically standing bond wires, entirely manufactured by a fully automated, standard wire bonding tool. Our process enables standing bond wires with a length of 1.24 mm, resulting in an extremely high aspect-ratio of 50, thus effectively increasing the surface area of the working electrode. All gas sensor electrodes are embedded in a polymer-based, solid electrolyte. Therefore, laborious handling of liquid electrolytes can be avoided. Here, we report of a nitric oxide (NO) gas sensor that is capable of detecting NO gas concentrations down to the single-digit ppm range. The proposed approach demonstrates the feasibility towards a scalable and entire back-end fabrication concept for low-cost NO gas sensors.