Failure analysis of dissimilar thickness resistance spot welded joints in dual-phase steels during tensile shear test

被引：40
|
作者：
Zhang, Hongqiang [1 ]
Qiu, Xiaoming [1 ]
Xing, Fei [1 ]
Bai, Jie [1 ]
Chen, Jianhe [2 ]
机构：
[1] Jilin Univ, Key Lab Automobile Mat, Minist Educ, Sch Mat Sci & Engn, Changchun 130025, Peoples R China
[2] Sanyou Automobile Parts Mfg Co Ltd, Changchun 130022, Peoples R China
来源：
MATERIALS & DESIGN | 2014年 / 55卷
关键词：
Ferrous metals and alloys; Welding; Fracture; MECHANICAL PERFORMANCE; MODE TRANSITION; DP600; MICROSTRUCTURE; SINGLE; SIZE;
D O I：
10.1016/j.matdes.2013.09.040
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Investigating the failure mode and failure mechanism of the dissimilar thickness dual phase sheets resistance spot welding joints was the objective of this study. Three distinct failure modes were observed during the tensile shear test: interfacial, partial interfacial and pullout failure. The results of the stress analysis of welded joints show that the tensile stress leads to the interfacial failure and the shear stress leads to the pullout failure. Due to more serious stress concentration and heat affected zone (HAZ) softening of DP780 side, the fracture is initiated from the DP780 steel. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：366 / 372
页数：7
相关论文
共 50 条
  • [1] Characteristics of the Resistance Spot Welding Joints in Dissimilar Thickness Dual-phase Steels
    Liang, Jingwei
    Zhang, Hongqiang
    Qiu, Xiaoming
    Shi, Yanan
    ISIJ INTERNATIONAL, 2015, 55 (09) : 2002 - 2007
  • [2] Uniaxial tensile and simple shear behavior of resistance spot-welded dual-phase steel joints
    Tao, Hong
    Tong, Wei
    Hector, Louis G., Jr.
    Zavattieri, Pablo D.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2008, 17 (04) : 517 - 534
  • [3] Uniaxial Tensile and Simple Shear Behavior of Resistance Spot-Welded Dual-Phase Steel Joints
    Hong Tao
    Wei Tong
    Louis G. Hector
    Pablo D. Zavattieri
    Journal of Materials Engineering and Performance, 2008, 17 : 517 - 534
  • [4] Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test
    Marashi, S. P. H.
    Pouranvari, M.
    Salehi, M.
    Abedi, A.
    Kaviani, S.
    MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (10) : 1220 - 1225
  • [5] Tensile shear and microstructural properties of resistance spot-welded low-carbon Mn-Ni dual-phase steels
    Hayat, F.
    Demir, B.
    Acarer, M.
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2008, 30 (01): : 19 - 32
  • [6] Microstructure and mechanical properties of resistance spot welded dissimilar thickness DP780/DP600 dual-phase steel joints
    Zhang, Hongqiang
    Wei, Ajuan
    Qiu, Xiaoming
    Chen, Jianhe
    MATERIALS & DESIGN, 2014, 54 : 443 - 449
  • [7] Modeling and Experimental Research on Resistance Spot Welded Joints for Dual-Phase Steel
    Zhao, Dawei
    Wang, Yuanxun
    Zhang, Peng
    Liang, Dongjie
    MATERIALS, 2019, 12 (07)
  • [8] Resistance spot welding macro characteristics of the dissimilar thickness dual phase steels
    Zhang, Hongqiang
    Qiu, Xiaoming
    Bai, Yang
    Xing, Fei
    Yu, Haiyan
    Shi, Yanan
    MATERIALS & DESIGN, 2014, 63 : 151 - 158
  • [9] Predicting Shear Failure of Dual-Phase Steels
    Kim, Ji Hoon
    Sung, Ji Hyun
    Matlock, D. K.
    Kim, Daeyong
    Wagoner, R. H.
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 63 - +
  • [10] Effect of Plate Deformation Around the Nugget during Tensile Test on Tensile Shear Strength of Resistance Spot Welded Lap Joints
    Kitamura T.
    Akiyama T.
    Imamura M.
    Kawabata T.
    Uemura A.
    Mihara C.
    Iwatani K.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2023, 41 (03): : 11 - 17
12345