Development of a mirror-based endoscope for divertor spectroscopy on JET with the new ITER-like wall (invited)

被引：50

作者：

Huber, A. ^{[1
]}

Brezinsek, S. ^{[1
]}

Mertens, Ph ^{[1
]}

Schweer, B. ^{[1
]}

Sergienko, G. ^{[1
]}

Terra, A. ^{[1
]}

Arnoux, G. ^{[2
]}

Balshaw, N. ^{[2
]}

Clever, M. ^{[1
]}

Edlingdon, T. ^{[2
]}

Egner, S. ^{[3
]}

Farthing, J. ^{[2
]}

Hartl, M. ^{[3
]}

Horton, L. ^{[4
]}

Kampf, D. ^{[3
]}

Klammer, J. ^{[5
]}

Lambertz, H. T. ^{[1
]}

Matthews, G. F. ^{[2
]}

Morlock, C. ^{[4
]}

Murari, A. ^{[4
]}

Reindl, M. ^{[5
]}

Riccardo, V. ^{[2
]}

Samm, U. ^{[1
]}

Sanders, S. ^{[2
]}

Stamp, M. ^{[2
]}

Williams, J. ^{[2
]}

Zastrow, K. D. ^{[2
]}

Zauner, C. ^{[5
]}

机构：

[1] Forschungszentrum Julich, EURATOM Assoc, Inst Energy & Climate Res Plasma Phys, D-52425 Julich, Germany

[2] Culham Sci Ctr, Euratom CCFE Fus Assoc, Abingdon OX14 3DB, Oxon, England

[3] Kayser Threde GmbH, D-81379 Munich, Germany

[4] Culham Sci Ctr, EFDA JET Close Support Unit, Culham OX14 3DB, Oxon, England

[5] KRP Mechatec Engn GbR, D-85748 Garching, Germany

来源：

REVIEW OF SCIENTIFIC INSTRUMENTS | 2012年 / 83卷 / 10期

关键词：

RECOMBINATION;

D O I：

10.1063/1.4731759

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

A new endoscope with optimised divertor view has been developed in order to survey and monitor the emission of specific impurities such as tungsten and the remaining carbon as well as beryllium in the tungsten divertor of JET after the implementation of the ITER-like wall in 2011. The endoscope is a prototype for testing an ITER relevant design concept based on reflective optics only. It may be subject to high neutron fluxes as expected in ITER. The operating wavelength range, from 390 nm to 2500 nm, allows the measurements of the emission of all expected impurities (W I, Be II, C I, C II, C III) with high optical transmittance (>= 30% in the designed wavelength range) as well as high spatial resolution that is <= 2 mm at the object plane and <= 3 mm for the full depth of field (+/- 0.7 m). The new optical design includes options for in situ calibration of the endoscope transmittance during the experimental campaign, which allows the continuous tracing of possible transmittance degradation with time due to impurity deposition and erosion by fast neutral particles. In parallel to the new optical design, a new type of possibly ITER relevant shutter system based on pneumatic techniques has been developed and integrated into the endoscope head. The endoscope is equipped with four digital CCD cameras, each combined with two filter wheels for narrow band interference and neutral density filters. Additionally, two protection cameras in the lambda > 0.95 mu m range have been integrated in the optical design for the real time wall protection during the plasma operation of JET. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4731759]

引用

页数：6

共 50 条

[21] Surface morphology of the bulk tungsten divertor tiles from JET ITER-like wall
Tokitani, M.
Miyamoto, M.
Masuzaki, S.
Hatano, Y.
Lee, S. E.
Oya, Y.
Otsuka, T.
Oyaidzu, M.
Kurotaki, H.
Suzuki, T.
Hamaguchi, D.
Hayashi, T.
Asakura, N.
Widdowson, A.
Jachmich, S.
Rubel, M.
PHYSICA SCRIPTA, 2020, T171 (01)
[22] Investigation of the influence of divertor recycling on global plasma confinement in JET ITER-like wall
Tamain, P.
Joffrin, E.
Bufferand, H.
Jarvinen, A.
Brezinsek, S.
Ciraolo, G.
Delabie, E.
Frassinetti, L.
Giroud, C.
Groth, M.
Lipschultz, B.
Lomas, P.
Marsen, S.
Menmuir, S.
Oberkofler, M.
Stamp, M.
Wiesen, S.
JOURNAL OF NUCLEAR MATERIALS, 2015, 463 : 450 - 454
[23] Transient impurity events in JET with the new ITER-like wall
Sertoli, M.
Flannegan, J. C.
Cackett, A.
Hodille, E.
de Vries, P.
Coffey, I. H.
Sieglin, B.
Marsen, S.
Brezinsek, S.
Matthews, G. F.
Coenen, J. W.
PHYSICA SCRIPTA, 2014, T159
[24] Power handling of the JET ITER-like wall
Arnoux, G.
Balboa, I.
Clever, M.
Devaux, S.
De Vries, P.
Eich, T.
Firdaouss, M.
Jachmich, S.
Lehnen, M.
Lomas, P. J.
Matthews, G. F.
Mertens, Ph
Nunes, I.
Riccardo, V.
Ruset, C.
Sieglin, B.
Valcarcel, D. F.
Wilson, J.
Zastrow, K-D
PHYSICA SCRIPTA, 2014, T159
[25] The influence of an ITER-like wall on disruptions at JET
de Vries, P. C.
Baruzzo, M.
Hogeweij, G. M. D.
Jachmich, S.
Joffrin, E.
Lomas, P. J.
Matthews, G. F.
Murari, A.
Nunes, I.
Puetterich, T.
Reux, C.
Vega, J.
PHYSICS OF PLASMAS, 2014, 21 (05)
[26] Overview of the JET ITER-like Wall Project
Philipps, V.
Mertens, Ph.
Matthews, G. F.
Maier, H.
FUSION ENGINEERING AND DESIGN, 2010, 85 (7-9) : 1581 - 1586
[27] Calorimetry of the JET ITER-Like Wall components
Devaux, S.
Arnoux, G.
Corre, Y.
Gardarein, J-L.
Gaspar, J.
Jacquet, P.
Marcotte, F.
Matthews, G.
Beaumont, P.
Cramp, S.
Dalley, S.
Kinna, D.
Horton, A.
Lomas, P.
Mertens, Ph.
Riccardo, V.
Valcarcel, D.
JOURNAL OF NUCLEAR MATERIALS, 2013, 438 : S1208 - S1211
[28] R&D on full tungsten divertor and beryllium wall for JET ITER-like wall project
Hirai, T.
Maier, H.
Rubel, M.
Mertens, Ph.
Neu, R.
Gauthier, E.
Likonen, J.
Lungu, C.
Maddaluno, G.
Matthews, G. F.
Mitteau, R.
Neubauer, O
Piazza, G.
Philipps, V.
Riccardi, B.
Ruset, C.
Uytdenhouwen, I.
FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 1839 - 1845
[29] Engineering challenges of the JET ITER-like Wall
Riccardo, V.
JOURNAL OF NUCLEAR MATERIALS, 2009, 390-91 : 895 - 899
[30] Overview of the JET results with the ITER-like wall
Romanelli, F.
Abel, I.
Afanesyev, V.
Aftanas, M.
Agarici, G.
Aggarwal, K. M.
Aho-Mantila, L.
Ahonen, E.
Aints, M.
Airila, M.
Akers, R.
Alarcon, Th.
Albanese, R.
Alexeev, A.
Alfier, A.
Allan, P.
Almaviva, S.
Alonso, A.
Alper, B.
Altmann, H.
Alves, D.
Ambrosino, G.
Amosov, V.
Andersson, F.
Sunden, E. Andersson
Andreev, V.
Andrew, Y.
Angelone, M.
Anghel, M.
Anghel, A.
Angioni, C.
Apruzzese, G.
Arcis, N.
Arena, P.
Argouarch, A.
Ariola, M.
Armitano, A.
Arnoux, G.
Arshad, S.
Artaserse, G.
Artaud, J. F.
Ash, A.
Asp, E.
Asunta, O.
Atanasiu, C. V.
Atkins, G.
Avotina, L.
Axton, M. D.
Ayres, C.
Baciero, A.
NUCLEAR FUSION, 2013, 53 (10)

← 1 2 3 4 5 →