Application of anion-conducting lanthanum oxychloride for potentiometric chlorine gas sensors

被引：10
|
作者：
Dziubaniuk, Malgorzata [1 ]
Trzesiec, Malgorzata [1 ]
Pasierb, Pawel [1 ]
Rekas, Mieczyslaw [1 ]
机构：
[1] AGH Univ Sci & Technol, Fac Mat Sci & Ceram, PL-30059 Krakow, Poland
来源：
SOLID STATE IONICS | 2012年 / 225卷
关键词：
Chlorine gas sensor; Solid electrolyte; Electrical impedance spectroscopy; Nasicon; Lanthanum oxychloride; SOLID ELECTROLYTES; COMBINATION;
D O I：
10.1016/j.ssi.2012.06.005
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The prototype potentiometric chlorine gas sensor was constructed using Na3Zr2Si2PO12 (Nasicon) as a solid electrolyte, two-phase (1 - y)LaOCl-yNaCl as a sensing electrode, and 0.85Na(2)Ti(3)O(2)-0.15Na(2)Ti(6)O(13) as a reference electrode. Nasicon, 0.85Na(2)Ti(3)O(7)-0.15Na(2)Ti(6)O(13) two-phase system and LaOCl powders were prepared by solid-state reaction method. Two-phase materials (1 - y)LaOCl-yNaCl of different compositions were obtained by doping LaOCl with Na2CO3. The best preparation conditions were determined based on differential thermal analysis and thermogravimetry (DTA and TG). All the samples were studied by X-ray diffraction (XRD) analysis. Electrical conductivity of (1 -y)LaOCl-yNaCl was measured using electrical impedance spectroscopy (EIS). The source voltage (SV) of the fabricated cell was measured as a function of temperature (400-600 degrees C), Cl-2 partial pressure in the range 1-9 Pa and time. Constructed sensor shows the most effective performance at 500 degrees C and in Cl-2 pressure range of 3-9 Pa. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：324 / 327
页数：4
相关论文
共 27 条
  • [21] A new type of chlorine gas sensor with the combination of Cl- anion and Al3+ cation conducting solid electrolytes
    Imanaka, N
    Okamoto, K
    Adachi, G
    MATERIALS LETTERS, 2003, 57 (13-14) : 1966 - 1969
  • [22] Development of mixed conducting dense nickel/Ca-doped lanthanum zirconate cermet for gas separation application
    Nag, S.
    Mukhopadhyay, S.
    Basu, R. N.
    MATERIALS RESEARCH BULLETIN, 2012, 47 (03) : 925 - 929
  • [23] Self-assembly of conducting polymer nanowires at air-water interface and its application for gas sensors
    Xu, Jianhua
    Jiang, Yadong
    Yang, Yajie
    Yu, Junsheng
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2009, 157 (1-3): : 87 - 92
  • [24] LEAD PHTHALOCYANINE AS A MIXED-CONDUCTING ELECTRODE - PRINCIPLE AND APPLICATION FOR O2 AND NO2 GAS SENSORS
    WIEMHOFER, HD
    SCHMEISSER, D
    GOPEL, W
    SOLID STATE IONICS, 1990, 40-1 : 421 - 427
  • [25] Catalytic Behaviour of Transition Metal Cations In Electrosynthesis and Growth of Nanostructure Conducting Polypyrrole Films On/Between the Passive Cu Interdigital Electrodes: Application In Gas Sensors
    Alizadeh, Naader
    Ghoorchian, Arash
    ELECTROANALYSIS, 2014, 26 (12) : 2644 - 2654
  • [26] Ionic conductivity of MAlSi2O6 (M = Li, Na, K, Rb and Cs) and its application as a potentiometric CO2 gas sensors
    Nakayama, S
    Kuwata, S
    Ichimori, T
    Okazaki, M
    Okamasa, M
    Imai, S
    Sakamoto, M
    Sadaoka, Y
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1998, 106 (07) : 715 - 718
  • [27] Potentiometric responses of CO2 and Cl2 gas sensors using ni reference electrode closed in Na+ conducting Na2O-Al2O3-4SiO2 glass
    Aono, H
    Miyanaga, S
    Sadaoka, Y
    ELECTROCHEMISTRY, 2005, 73 (09) : 791 - 797
123