Effect of steel fibre on fracture toughness of concrete

被引：7

作者：

Sangeetha, S. ^{[1
]}

Sakthieswaran, N. ^{[1
]}

Babu, O. Ganesh ^{[1
]}

机构：

[1] Anna Univ, Dept Civil Engn, Reg Campus Tirunelveli, Tirunelveli 627007, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 37卷

关键词：

Fracture toughness; Notch depth ratio; Steel fibre; Three-point bending test; Foundry sand;

D O I：

10.1016/j.matpr.2020.06.289

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The project focuses on fracture toughness of steel fibre reinforced concrete. M30 grade concrete is used in this project. 5%0.10%, 15%,20%, 25% and 30% of Ground Granulated Blast Furnace Slag (GGBFS) is replaced with cement. The hooked end steel fibre addition is kept constant as 3% by weight of binder content. 5%, 10%, 15%, 20%, 25%, and 30% of foundry sand is replaced with fine aggregate. Specimens of size 500 x 50 x 50 mm are used with notch of constant width 3 mm with notch depth ratios of 0.1, 0.2, 0.3, and 0.4. The fracture toughness is determined by using three-point bending test. The results are compared with the results of ordinary concrete mix. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页码：1036 / 1040

页数：5

共 50 条

[41] Biaxial Fracture Behaviour of Steel-Span and Steel-Fibre- Reinforced Concrete
Tschegg, Elmar K.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2009, 7 (02) : 229 - 238
[42] Strength and fracture properties of industrially prepared steel fibre reinforced concrete
Lee, MK
Barr, BIG
CEMENT & CONCRETE COMPOSITES, 2003, 25 (03): : 321 - 332
[43] INFLUENCE OF STEEL FIBRE REINFORCEMENT ON THE FRACTURE BEHAVIOUR OF CONCRETE IN COMPRESSION.
Mangat, P.S.
Azari, M.Motamedi
International journal of cement composites and lightweight concrete, 1984, 6 (04): : 219 - 232
[44] Effect of heat treatment on the fracture toughness of glass fibre reinforced polypropylene
Lin, JS
Wu, SK
POLYMERS & POLYMER COMPOSITES, 2002, 10 (03): : 211 - 218
[45] FRACTURE ENERGY AND FRACTURE-TOUGHNESS OF CONCRETE
SABIR, BB
MAGAZINE OF CONCRETE RESEARCH, 1994, 46 (169) : 237 - 243
[46] Size Effect of Fracture Toughness of High Strength Fiber Concrete
Zhou, Hao
Huang, Peiyan
Zheng, Shunchao
Hu, Ruolin
ADVANCED SCIENCE LETTERS, 2011, 4 (03) : 977 - 980
[47] Strength and Toughness of Steel Fibre Reinforced Reactive Powder Concrete Under Blast Loading
KUZNETSOV Valerian A
REBENTROST Mark
WASCHL John
Transactions of Tianjin University, 2006, (S1) : 70 - 74
[48] Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete
Golewski, Grzegorz Ludwik
INFRASTRUCTURES, 2024, 9 (10)
[49] Flexural Toughness Properties of Reinforced Steel Fibre Incorporated Alkali Activated Slag Concrete
Karunanithi, Srinivasan
Anandan, Sivakumar
ADVANCES IN CIVIL ENGINEERING, 2014, 2014
[50] THE EFFECT OF TEST SPECIMEN SIZE ON THE FRACTURE-TOUGHNESS OF CONCRETE
BARR, BIG
HASSO, EBD
SABIR, BB
CEMENT AND CONCRETE RESEARCH, 1985, 15 (05) : 833 - 841

← 1 2 3 4 5 →