Influence of silicon-ion implantation on the oxidation behaviour of austenitic Fe-30Mn-5Al and Fe-30Mn-5Al-9Cr alloys

被引：0
|
作者：
Pérez, P
Pérez, FJ
Gómez, C
Adeva, P
机构：
[1] CSIC, Ctr Nacl Invest Met, Madrid 28040, Spain
[2] Univ Complutense Madrid, Fac Ciencias Quim, Dept Ciencia Mat, E-28040 Madrid, Spain
来源：
REVISTA DE METALURGIA | 2005年
关键词：
high temperature oxidation; ion implantation; alloying elements; stainless steel;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In the present work the influence of silicon ion implantation on the oxidation behaviour in air between 600 and 800 degrees C of an austenitic Fe-30Mn-5Al with and without 9 % Cr additions has been evaluated. Silicon ion implantation increases slightly the oxidation rate but the different stages of the oxidation are not modified substantially. Silicon content on the surface of the alloy does not result in the formation of a continuous protective SiO2 layer. In addition, the establishment of a protective alumina layer is delayed. Furthermore, silicon does not improve the adherence of the oxide scale, since the SiO2 is not located at the scale/metal interface.
引用
收藏
页码：255 / 259
页数：5
相关论文
共 50 条
  • [21] Effect of chromium content on corrosion Behaviors of Fe-9Al-30Mn-(3,5,6.5,8)Cr-1C alloys
    Wang, Cheng Shun
    Tsai, Cheng Yao
    Chao, Chuen Guang
    Liu, Tzeng Feng
    MATERIALS TRANSACTIONS, 2007, 48 (11) : 2973 - 2977
  • [22] Effects of C and Cr content on high-temperature microstructures of Fe-9Al-30Mn-xC-yCr alloys
    Chen, May-Show
    Cheng, Hsin-Chung
    Huang, Chiung-Fang
    Chao, Chih-Yeh
    Ou, Keng-Liang
    Yu, Chih-Hua
    MATERIALS CHARACTERIZATION, 2010, 61 (02) : 206 - 211
  • [23] The wire electro-discharge machining characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr shape memory alloys
    Lin, HC
    Lin, KM
    Chen, YS
    Chu, CL
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 161 (03) : 435 - 439
  • [24] Effects of cobalt content on the microstructures of Fe-9Al-30Mn-1C-xCo alloys
    Chen, Chin-Sung
    Lin, Che-Tong
    Peng, Pei-Wen
    Huang, Mao-Suan
    Ou, Keng-Liang
    Lin, Ling-Hung
    Yu, Chih-Hua
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 493 (1-2) : 346 - 351
  • [25] Phase transitions in an Fe-9Al-30Mn-2.0C alloy
    Wang, C. S.
    Hwang, C. N.
    Chao, C. G.
    Liu, T. F.
    SCRIPTA MATERIALIA, 2007, 57 (09) : 809 - 812
  • [26] Continuous Transition of Deformation Mode in Fe-30Mn-5Si-1Al Alloy
    Koyama, Motomichi
    Sawaguchi, Takahiro
    Ogawa, Kazuyuki
    Kikuchi, Takehiko
    Murakami, Masato
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2009, 73 (03) : 174 - 179
  • [27] Continuous Transition of Deformation Modes in Fe-30Mn-5Si-1Al Alloy
    Koyama, Motomichi
    Sawaguchi, Takahiro
    Ogawa, Kazuyuki
    Kikuchi, Takehiko
    Murakami, Masato
    MATERIALS TRANSACTIONS, 2010, 51 (07) : 1194 - 1199
  • [28] Electrochemical behaviour of Fe-20Cr-5Al and Fe-20Cr-5Al-0.3Y alloys in aqueous solutions
    Liu, G. M.
    Yu, F.
    Zhang, C. R.
    Du, N.
    Li, M. S.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2008, 43 (03) : 231 - 235
  • [29] Corrosion behaviors of austenitic Fe-30Mn-7Al-xCr-1C alloys in 3.5% NaCl solution
    Tuan, Y. H.
    Wang, C. S.
    Tsai, C. Y.
    Chao, C. G.
    Liu, T. F.
    MATERIALS CHEMISTRY AND PHYSICS, 2009, 114 (2-3) : 595 - 598
  • [30] STUDY ON A CRYOGENIC AND NON-MAGNETIC AUSTENITIC STEEL, 30Mn23Al4Cr5.
    Zhang Yansheng
    Jinshu Xuebao/Acta Metallurgica Sinica, 1983, 19 (04):
12345