Effect of fatigue loading on the bond behaviour between UHM CFRP plates and steel plates

被引:71
|
作者
Wu, Chao [1 ]
Zhao, Xiao Ling [1 ]
Chiu, Wing Kong [2 ]
Al-Mahaidi, Riadh [3 ]
Duan, Wen Hui [1 ]
机构
[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3168, Australia
[2] Monash Univ, Dept Mech & Aerosp Engn, Clayton, Vic 3168, Australia
[3] Swinburne Univ Technol, Fac Engn & Ind Sci, Hawthorn, Vic 3122, Australia
基金
澳大利亚研究理事会;
关键词
Carbon fibre; Laminates; Debonding; Fatigue; CFRP-to-steel bond; FRP; STRENGTH; PERFORMANCE;
D O I
10.1016/j.compositesb.2013.02.040
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Extensive research has been conducted on static bond behaviour between CFRP and steel. However, very limited research is available on the effect of fatigue loading on the bond behaviour between CFRP and steel. This paper attempts to fill the knowledge gap in this area. A series of static and fatigue tests on UHM (ultra high modulus) CFRP plate and steel plate double strap joints were conducted. Five specimens were tensioned to failure under static loading as control specimens. The other 12 specimens were tested under fatigue loading with load ratios ranging from 0.2 to 0.6 (defined as the ratio of the maximum fatigue load to the average static bond strength of control specimens). After going through pre-set number of fatigue cycles, the specimens were tensioned to failure under static loading. The failure modes, residual bond strength and residual bond stiffness of such specimens were compared with those of control specimens, to facilitate the investigation of the effect of fatigue loading on the bond behaviour. Microscopic investigation was also performed to reveal the underlying failure mechanism. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:344 / 353
页数:10
相关论文
共 50 条
  • [31] Effect of clamping force on the fatigue behaviour of punched plates subjected to axial loading
    Aragón, A
    Alegre, JM
    Gutiérrez-Solana, F
    ENGINEERING FAILURE ANALYSIS, 2006, 13 (02) : 271 - 281
  • [32] Mixed-Mode Debonding Behavior between CFRP Plates and Concrete under Fatigue Loading
    Zhang, Wei
    Tang, Zhanzhan
    Yang, Yan
    Wei, Jiangang
    Stanislav, Pospisil
    JOURNAL OF STRUCTURAL ENGINEERING, 2021, 147 (05)
  • [33] Bond behaviour between CFRP laminates and steel members under different loading rates
    Al-Mosawe, Alaa
    Al-Mahaidi, Riadh
    Zhao, Xiao-Ling
    COMPOSITE STRUCTURES, 2016, 148 : 236 - 251
  • [34] Fatigue strength of CFRP strengthened welded joints with corrugated steel plates
    Wang, Zhi-Yu
    Wang, Qing-Yuan
    COMPOSITES PART B-ENGINEERING, 2015, 72 : 30 - 39
  • [35] Fatigue Performance of Tension Steel Plates Strengthened with Prestressed CFRP Laminates
    Ye Huawen
    Koenig, Christian
    Ummenhofer, Thomas
    Qiang Shizhong
    Plum, Robin
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2010, 14 (05) : 609 - 615
  • [36] Fatigue behavior of steel plates with multi-holes repaired by CFRP
    Chen T.
    Yao J.
    Liu R.
    Li L.
    Composite Structures, 2021, 242
  • [37] Strengthening of cracked DH36 steel plates by CFRP sheets under fatigue loading at low temperatures
    Hu, Lili
    Li, Mingyi
    Yiliyaer, Tuerxunmaimaiti
    Gao, Wanyang
    Wang, Haitao
    OCEAN ENGINEERING, 2022, 243
  • [38] Behaviour of beams reinforced with CFRP plates
    Curcio, DS
    Castro, PF
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2003, 19 (06): : 542 - 549
  • [39] FRP-steel bond study of IM and UHM CFRP strips
    Peiris, A.
    Harik, I.
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 185 : 628 - 637
  • [40] Fatigue strengthening of cracked steel plates with CFRP laminates in the case of old steel material
    Lepretre, E.
    Chataigner, S.
    Dieng, L.
    Gaillet, L.
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 174 : 421 - 432