Impact mechanism of different fill layout patterns on the cooling performance of the wet cooling tower with water collecting devices

被引：39

作者：

Lyu, Dongqiang ^{[1
]}

Sun, Fengzhong ^{[1
]}

Zhao, Yuanbin ^{[1
]}

机构：

[1] Shandong Univ, Sch Energy & Power Engn, Jinan 250061, Peoples R China

来源：

APPLIED THERMAL ENGINEERING | 2017年 / 110卷

关键词：

Wet cooling tower with water collecting devices (WCTWCD); Numerical simulation; Non-uniform layout fill; Cooling performance; Circumferential coefficient; Radial coefficient;

D O I：

10.1016/j.applthermaleng.2016.08.190

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper deals with the impact mechanism of different fill layout patterns on the cooling performance of the wet cooling tower with water collecting devices (WCTWCD). A 3D numerical model for the WCTWCD is established and validated. The non-uniform layout fill for the WCTWCD is firstly proposed and analyzed. The differences of the performance parameters caused by the different fill layout patterns are studied. Studies in the paper indicate that the uniform layout fill is not the best layout pattern for the WCTWCD. The non-uniform layout fill can enhance the tower cooling performance in both windless and crosswind conditions. To evaluate the ventilation uniformity inside the tower the circumferential coefficient and the radial coefficient are proposed by the author. The air flow field in the tower with non-uniform layout fill is more stable and uniform. The coupling of the air flow field and the fill consumption in the tower with non-uniform layout fill is more reasonable. At last the comparison of the non-uniform layout fill between the conventional wet cooling tower (CWCT) and the WCTWCD is presented. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：1389 / 1400

页数：12

共 50 条

[31] Thermal performance analysis of a closed wet cooling tower
Papaefthimiou, V. D.
Zannis, T. C.
Rogdakis, E. D.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2007, 221 (E3) : 139 - 150
[32] Thermodynamic Investigation on the Performance of Closed Wet Cooling Tower
Fang, Jiamei
Zhao, Xuhui
Zhang, Lin
Bu, Shi
Yu, Zhikang
Xu, Weigang
Hu, Yiyang
Shan, Yanfei
Li, Yong
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2022, 14 (03)
[33] PERFORMANCE ANALYSIS OF COUNTER FLOW WET COOLING TOWER
Ramkumar, R.
Ragupathy, A.
INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION, 2011, 19 (02) : 141 - 148
[34] An exergy analysis on the performance of a counterflow wet cooling tower
Muangnoi, Thirapong
Asvapoositkul, Wanchai
Wongwises, Somchai
APPLIED THERMAL ENGINEERING, 2007, 27 (5-6) : 910 - 917
[35] Investigation on the cooling performance of mechanical draft dry-wet hybrid cooling tower
Zhao, Cuilin
Wang, Mingwei
Gao, Qi
Cheng, Shen
He, Suoying
Zhao, Jifang
Zhan, Jianwei
Liu, Zhilan
Geng, Zhe
Zhang, Shuzhen
Qi, Jianhui
Gao, Ming
Shi, Yuetao
APPLIED THERMAL ENGINEERING, 2023, 228
[36] Experimental investigation of fill pack impact on thermal-hydraulic performance of evaporative cooling tower
Dmitriev, A., V
Madyshev, I. N.
Kharkov, V. V.
Dmitrieva, O. S.
Zinurov, V. E.
THERMAL SCIENCE AND ENGINEERING PROGRESS, 2021, 22
[37] Performance of the Shower cooling tower in different climates
Dept. of Architecture, UCLA, Los Angeles, CA, United States
Renewable Energy, 10 (2-3 SPEC. ISS.): : 173 - 178
[38] Performance characteristics of a trickle fill in cross- and counter-flow configuration in a wet-cooling tower
Grobbelaar, P. J.
Reuter, H. C. R.
Bertrand, T. P.
APPLIED THERMAL ENGINEERING, 2013, 50 (01) : 475 - 484
[39] Performance of the ''Shower'' cooling tower in different climates
Givoni, B
RENEWABLE ENERGY, 1997, 10 (2-3) : 173 - 178
[40] Reducing cooling tower fill fouling and degradation with water quality control
Olson, Vickie G.
Proceedings of the ASME Power Conference 2007, 2007, : 785 - 789

← 1 2 3 4 5 →