Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour-urea formaldehyde adhesive

被引：44
|
作者：
Moubarik, Amine [1 ]
Mansouri, Hamid Reza [2 ]
Pizzi, Antonio [3 ]
Allal, Ahmed [4 ]
Charrier, Fatima [4 ]
Badia, Miguel Angel [5 ]
Charrier, Bertrand [4 ]
机构：
[1] ENSET, MAScIR NANOTECH, Rabat 10100, Morocco
[2] Univ Zabol, Dept Wood Sci & Technol, Zabol, Iran
[3] Univ Nancy 1, ENSTIB, Epinal, France
[4] Univ Pau & Pays Adour, IPREM EPCP, UMR 5254, F-64053 Pau 9, France
[5] EGGER ROL, Rion Des Landes, France
来源：
COMPOSITES PART B-ENGINEERING | 2013年 / 44卷 / 01期
关键词：
Wood; Resins; Mechanical properties; Physical properties; Rheological properties; EXTERIOR WOOD ADHESIVES; RESINS;
D O I：
10.1016/j.compositesb.2012.07.041
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study was to determine the effect of corn flour content of urea formaldehyde (UF) resin on the panel properties of particleboard. Corn flour was added to UF resin to decrease the free formaldehyde content of particleboard panels. Some physical (thickness swelling and rheological characterization), mechanical (modulus of elasticity, modulus of rupture, internal bond strength and withdrawal of screws) properties and formaldehyde emission of particleboards were evaluated. The results showed that the introduction of small proportions of corn flour (7%, by weight) in UF resins contributes to the improvement of mechanical and physical properties of the boards and reduced their formaldehyde emissions. Hazardous petrochemical UF could be partially substituted in industrial applications by addition of corn flour. To our knowledge, this is the first study on this kind of wood adhesives. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：48 / 51
页数：4
相关论文
共 50 条
  • [31] Evaluation of three test methods in determination of formaldehyde emission from particleboard bonded with different mole ratio in the urea-formaldehyde resin
    Que, Zeli
    Furuno, Takeshi
    Katoh, Sadanobu
    Nishino, Yoshihiko
    BUILDING AND ENVIRONMENT, 2007, 42 (03) : 1242 - 1249
  • [32] Evaluation of physical and mechanical properties of particleboard made from petung bamboo using sucrose-based adhesive
    Widyorini R.
    BioResources, 2020, 15 (03): : 5072 - 5086
  • [33] Evaluation of Physical and Mechanical Properties of Particleboard Made from Petung Bamboo Using Sucrose-based Adhesive
    Widyorini, Ragil
    BIORESOURCES, 2020, 15 (03): : 5072 - 5086
  • [34] Mechanical characterization of industrial particleboard panels glued with cornstarch-mimosa tannin-urea formaldehyde resins
    Moubarik, Amine
    Pizzi, Antonio
    Charrier, Fatima
    Allal, Ahmed
    Badia, MiguelAngel
    Mansouri, Hamid Reza
    Charrier, Bertrand
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2013, 27 (04) : 423 - 429
  • [35] INFLUENCE OF THE MULTIDAY AND CONTINUOUS HOT PRESS ON THE PHYSICAL, MECHANICAL AND FORMALDEHYDE EMISSION PROPERTIES OF THE PARTICLEBOARD
    Camlibel, Osman
    MADERAS-CIENCIA Y TECNOLOGIA, 2023, 25
  • [36] Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard
    Pirayesh, Hamidreza
    Khanjanzadeh, Hossein
    Salari, Ayoub
    COMPOSITES PART B-ENGINEERING, 2013, 45 (01) : 858 - 863
  • [37] Replacing formaldehyde by furfural in urea formaldehyde resin: effect on formaldehyde emission and physical–mechanical properties of particleboards
    Robab Ghafari
    Kazem DoostHosseini
    Ali Abdulkhani
    Sayed Ahmad Mirshokraie
    European Journal of Wood and Wood Products, 2016, 74 : 609 - 616
  • [38] Replacing formaldehyde by furfural in urea formaldehyde resin: effect on formaldehyde emission and physical-mechanical properties of particleboards
    Ghafari, Robab
    DoostHosseini, Kazem
    Abdulkhani, Ali
    Mirshokraie, Sayed Ahmad
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2016, 74 (04) : 609 - 616
  • [39] Physical and mechanical properties of flame retardant urea formaldehyde medium density fiberboard
    Hashim, R.
    Sulaiman, O.
    Kumar, R. N.
    Tamyez, P. F.
    Murphy, R. J.
    Ali, Z.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (02) : 635 - 640
  • [40] MECHANICAL AND PHYSICAL PROPERTIES OF OIL PALM TRUNK CORE PARTICLEBOARD BONDED WITH DIFFERENT UF RESINS
    Lee, S. H.
    H'ng, P. S.
    Lum, W. C.
    Zaidon, A.
    Bakar, E. S.
    Nurliyana, M. Y.
    Chai, E. W.
    Chin, K. L.
    JOURNAL OF OIL PALM RESEARCH, 2014, 26 (02): : 163 - 169
12345