Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour-urea formaldehyde adhesive

被引：44
|
作者：
Moubarik, Amine [1 ]
Mansouri, Hamid Reza [2 ]
Pizzi, Antonio [3 ]
Allal, Ahmed [4 ]
Charrier, Fatima [4 ]
Badia, Miguel Angel [5 ]
Charrier, Bertrand [4 ]
机构：
[1] ENSET, MAScIR NANOTECH, Rabat 10100, Morocco
[2] Univ Zabol, Dept Wood Sci & Technol, Zabol, Iran
[3] Univ Nancy 1, ENSTIB, Epinal, France
[4] Univ Pau & Pays Adour, IPREM EPCP, UMR 5254, F-64053 Pau 9, France
[5] EGGER ROL, Rion Des Landes, France
来源：
COMPOSITES PART B-ENGINEERING | 2013年 / 44卷 / 01期
关键词：
Wood; Resins; Mechanical properties; Physical properties; Rheological properties; EXTERIOR WOOD ADHESIVES; RESINS;
D O I：
10.1016/j.compositesb.2012.07.041
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study was to determine the effect of corn flour content of urea formaldehyde (UF) resin on the panel properties of particleboard. Corn flour was added to UF resin to decrease the free formaldehyde content of particleboard panels. Some physical (thickness swelling and rheological characterization), mechanical (modulus of elasticity, modulus of rupture, internal bond strength and withdrawal of screws) properties and formaldehyde emission of particleboards were evaluated. The results showed that the introduction of small proportions of corn flour (7%, by weight) in UF resins contributes to the improvement of mechanical and physical properties of the boards and reduced their formaldehyde emissions. Hazardous petrochemical UF could be partially substituted in industrial applications by addition of corn flour. To our knowledge, this is the first study on this kind of wood adhesives. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：48 / 51
页数：4
相关论文
共 50 条
  • [1] Physical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesive
    Valarelli, Ivaldo De Domenico
    Gomes Battistelle, Rosane Ap
    Pereira Bueno, Marcus Antonio
    Bezerra, Barbara Stolte
    de Campos, Cristiane I.
    Alves, Manoel C. de S.
    MATERIA-RIO DE JANEIRO, 2014, 19 (01): : 1 - 6
  • [2] Physical and mechanical properties of urea formaldehyde-bonded particleboard made from bamboo waste
    Biswas, Daisy
    Bose, Samar Kanti
    Hossain, M. Mozaffar
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2011, 31 (02) : 84 - 87
  • [3] Effects of acidity of the particles and amount of hardener on the physical and mechanical properties of particleboard composite bonded with urea formaldehyde
    Akyuz, Kadri Cemil
    Nemli, Gokay
    Baharoglu, Mehmet
    Zekovic, Emir
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2010, 30 (03) : 166 - 169
  • [4] Influence of Isocyanate Content and Hot-Pressing Temperatures on the Physical-Mechanical Properties of Particleboard Bonded with a Hybrid Urea-Formaldehyde/Isocyanate Adhesive
    Iswanto, Apri Heri
    Sutiawan, Jajang
    Darwis, Atmawi
    Lubis, Muhammad Adly Rahandi
    Pedzik, Marta
    Rogozinski, Tomasz
    Fatriasari, Widya
    FORESTS, 2023, 14 (02):
  • [5] USE OF BUCKWHEAT STALK IN PARTICLEBOARD BONDED WITH UREA-FORMALDEHYDE RESIN ADHESIVE
    Oh, Yong-Sung
    Lee, Sung-Suk
    CELLULOSE CHEMISTRY AND TECHNOLOGY, 2012, 46 (9-10): : 643 - 647
  • [6] Investigation of the physical and mechanical properties of lightweight particleboard bonded by foamable polyurethane adhesive
    Junfeng Wang
    Tenghua Huang
    Fujuan Lei
    Lianhua Song
    Jie Luan
    Zhengjie Tang
    European Journal of Wood and Wood Products, 2022, 80 : 213 - 222
  • [7] Investigation of the physical and mechanical properties of lightweight particleboard bonded by foamable polyurethane adhesive
    Wang, Junfeng
    Huang, Tenghua
    Lei, Fujuan
    Song, Lianhua
    Luan, Jie
    Tang, Zhengjie
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2022, 80 (01) : 213 - 222
  • [8] Passion fruit hulls particleboard: the effect of urea formaldehyde level on physical and mechanical properties
    Iswanto, A. H.
    Sucipto, T.
    Adlina, E.
    Prabuningrum, D. S.
    INTERNATIONAL CONFERENCE ON AGRICULTURE, ENVIRONMENT, AND FOOD SECURITY, 2018, 122
  • [9] The Effect of Nanocopper Additions in a Urea-Formaldehyde Adhesive on the Physical and Mechanical Properties of Particleboard Manufactured from Date Palm Waste
    Rangavar, H.
    Fard, M. S. Hoseiny
    MECHANICS OF COMPOSITE MATERIALS, 2015, 51 (01) : 119 - 126
  • [10] The Effect of Nanocopper Additions in a Urea-Formaldehyde Adhesive on the Physical and Mechanical Properties of Particleboard Manufactured from Date Palm Waste
    H. Rangavar
    M. S. Hoseiny fard
    Mechanics of Composite Materials, 2015, 51 : 119 - 126
12345