Mechanical properties of feedstock material for fused deposition of ceramics

被引：0

作者：

Venkataraman, N ^{[1
]}

McNulty, T ^{[1
]}

Rangarajan, S ^{[1
]}

Vidaic, M ^{[1
]}

Matthewson, MJ ^{[1
]}

Langrana, N ^{[1
]}

Safari, A ^{[1
]}

Danforth, SC ^{[1
]}

机构：

[1] Rutgers State Univ, Dept Ceram & Mat Engn, Piscataway, NJ 08854 USA

来源：

SOLID FREEFORM AND ADDITIVE FABRICATION | 1999年 / 542卷

关键词：

D O I：

暂无

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A scientific methodology to characterize the critical mechanical properties of feedstock material for fused deposition of ceramics has been developed. A detailed discussion of the methodology of mechanical characterization and results for lead zirconate titanate (PZT) fused deposition of ceramics (FDC) feedstock is presented. The effect of storage time, temperature and crosshead displacement rates on the mechanical properties of the PZT FDC feedstock was studied. The modulus and the failure stress increase with displacement rate. The modulus and failure stress decrease with temperature indicating the necessity for cooling filaments prior to entrance to liquefier. The modulus also decreases with storage time in 50% RH while failure strain increases with storage time in 50% RH.

引用

页码：111 / 117

页数：7

共 50 条

[21] Effects of material properties on warpage in fused deposition modeling parts
Fitzharris, Emily R.
Watanabe, Narumi
Rosen, David W.
Shofner, Meisha L.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (5-8): : 2059 - 2070
[22] Fused-deposition structural ceramics
不详
MECHANICAL ENGINEERING, 1997, 119 (05) : 32 - 32
[23] Fused deposition of ceramics and metals: An overview
Agarwala, MK
van Weeren, R
Bandyopadhyay, A
Whalen, PJ
Safari, A
Danforth, SC
SOLID FREEFORM FABRICATION PROCEEDINGS, SEPTEMBER 1996, 1996, : 385 - 392
[24] Influence of raw material grain composition on the properties of fused silica ceramics
Wang, Qingtao
Li, Sen
Yu, Huaqin
Li, Fengzhi
Xu, Huijun
Qiao, Haibo
Liu, Juncheng
Du, Qingyang
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2017, 18 (08): : 594 - 598
[25] Influence of Built Orientation on Mechanical Properties in Fused Deposition Modeling
Raut, Sandeep V.
Jatti, Vijaykumar S.
Singh, T. P.
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 400 - 404
[26] FUSED FILAMENT DEPOSITION OF SILICONE BLENDS WITH TUNABLE MECHANICAL PROPERTIES
Jaipean, Bryson
Estelle, Kevin
Tandel, Ruchira
Gozen, B. Arda
PROCEEDINGS OF THE ASME 2020 15TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE (MSEC2020), VOL 1A, 2020,
[27] Impact of temperature and material variation on mechanical properties of parts fabricated with fused deposition modeling (FDM) additive manufacturing
Sehhat, M. Hossein
Mahdianikhotbesara, Ali
Yadegari, Farzad
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (7-8): : 4791 - 4801
[28] Correlation between production parameters and mechanical properties of ABS plus p430 fused deposition material
Corsi, M.
Bagassi, S.
Moruzzi, M. C.
Seccia, L.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (05) : 2478 - 2487
[29] Impact of temperature and material variation on mechanical properties of parts fabricated with fused deposition modeling (FDM) additive manufacturing
M. Hossein Sehhat
Ali Mahdianikhotbesara
Farzad Yadegari
The International Journal of Advanced Manufacturing Technology, 2022, 120 : 4791 - 4801
[30] Study of Material Color Influences on Mechanical Characteristics of Fused Deposition Modeling Parts
Gao, Ge
Xu, Fan
Xu, Jiangmin
Liu, Zhenyu
MATERIALS, 2022, 15 (19)

← 1 2 3 4 5 →