Measurement Corrections for Active Magnetic Bearing Control

被引:0
|
作者
Almeida, L. C. A. [1 ]
Barbosa, J. M. A. [1 ]
Santos, F. C. G. [1 ]
del Foyo, P. M. G. [1 ]
机构
[1] Univ Fed Pernambuco, Av Prof Moraes Rego 1235,Cidade Univ, BR-50670901 Recife, PE, Brazil
关键词
Active magnetic bearing; Measurement correction; Inductive sensor;
D O I
10.1007/978-3-319-99262-4_28
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Rotor shaft position measurement is an important part of the algorithm performance in the active magnetic bearing control. The shaft centerline is estimated based on the measurement of the shaft surface distance to the sensor position. When the shaft surface has a large curvature, the measurement needs to be corrected in order to eliminate geometric correlations between measurements in the two axes. Such correlations have an impact on the control algorithm performance. The objective of this work is to propose a geometric model to estimate a more accurate position of the shaft centerline, considering also possible deviations of the sensor alignment. Corrections were applied to a control algorithm in an experimental active magnetic bearing workbench, showing an improvement of the control performance based on average distance to operation center criterion.
引用
收藏
页码:386 / 396
页数:11
相关论文
共 50 条
  • [31] On the robust stability of segmented driveshafts with active magnetic bearing control
    Desmidt, HA
    Wang, KW
    Smith, EC
    Provenza, AJ
    JOURNAL OF VIBRATION AND CONTROL, 2005, 11 (03) : 317 - 329
  • [32] Application of classical control theory on active magnetic bearing system
    Kong Zhi Li Lun Yu Ying Yong, 6 (837-841):
  • [33] Hybrid control of a three-pole active magnetic bearing
    Kiani, Mandi
    Salarieh, Hassan
    Alasty, Aria
    Darbandi, S. Mandi
    MECHATRONICS, 2016, 39 : 28 - 41
  • [34] SIMULTANEOUS TIME-FREQUENCY CONTROL OF ACTIVE MAGNETIC BEARING
    Liu, Meng-Kun
    Suh, C. Steve
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 4A, 2014,
  • [35] Digital control system of active magnetic bearing based on DSP
    School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
    不详
    Dongbei Daxue Xuebao, 2007, 7 (1025-1028):
  • [36] Model and control law of CMG active magnetic bearing rotor
    Yu, Wen-Bo
    Luan, Sheng
    Fang, Jian-Cheng
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2003, 24 (06): : 541 - 545
  • [37] Optimal fuzzy control of radial active magnetic bearing systems
    Yu, SS
    Wu, SJ
    Lee, TT
    2003 IEEE INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL INTELLIGENCE IN ROBOTICS AND AUTOMATION, VOLS I-III, PROCEEDINGS, 2003, : 1393 - 1398
  • [38] Implicit Generalized Predictive Control of an Active Magnetic Bearing System
    Wu, Chang
    Zhu, Changsheng
    2014 17TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2014, : 2319 - 2323
  • [39] Design and Analysis of a Radial Active Magnetic Bearing for Vibration Control
    Kumar, Gaurav
    Choudhury, Madhurjya Dev
    Natesan, Sivaramakrishnan
    Kalita, Karuna
    INTERNATIONAL CONFERENCE ON VIBRATION PROBLEMS 2015, 2016, 144 : 810 - 816
  • [40] Neural network PID control scheme for the active magnetic bearing
    Shi, Yang
    Yan, Weisheng
    Ren, Zhang
    Xu, Demin
    Jixie Kexue Yu Jishu/Mechanical Science and Technology, 1998, 17 (02): : 337 - 338