Fractal dimension used for evaluation of oxidation behaviour of Fe-Al-Cr-Zr-C alloys

被引:19
|
作者
Hotar, Vlastimil [1 ]
Hotar, Adam [2 ]
机构
[1] Tech Univ Liberec, Dept Glass Producing Machines & Robot, Studentska 2, Liberec 46117, Czech Republic
[2] Tech Univ Liberec, Dept Mat Sci, Studentska 2, Liberec 46117, Czech Republic
关键词
Intermetallics (based on Fe3Al); Fractal geometry; Oxidation; CORROSION-RESISTANCE; GEOMETRY; SURFACE; GLASS;
D O I
10.1016/j.corsci.2018.01.017
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The article describes the possibility of using a methodology for the quantification of oxidised surfaces. The methodology is based on determining the parameters on a dividing line between alloy and air which has been generated from images of a cross-section sample. The parameters are obtained from the methodology using fractal geometry, surface roughness characterisation and statistic tools. The methodology is presented on oxidised iron aluminides (Fe-29.7Al-3.8Cr-0.3Zr-0.2C and Fe-26.4Al-2.8Cr-0.2Zr-0.6C) at high temperatures (900-1200 degrees C). The results show that methodology can be used for easy quantification of alloy oxidation attacks and for easy comparison of alloy oxidation resistance.
引用
收藏
页码:141 / 149
页数:9
相关论文
共 50 条
  • [41] Temperature and water vapour effects on the cyclic oxidation behaviour of Fe-Cr alloys
    Othman, Norinsan K.
    Zhang, Jianqiang
    Young, David J.
    CORROSION SCIENCE, 2010, 52 (09) : 2827 - 2836
  • [42] The effect of rare earth additions on the oxidation behaviour of Fe-20Cr alloys
    Fernandes, SMC
    Ramanathan, LV
    CORROSION PREVENTION & CONTROL, 2002, 49 (03): : 99 - 104
  • [43] Interdiffusion in Low-Al Fe-Cr-Al Alloys at 1000 °C
    Yoneda, Suzue
    Hayashi, Shigenari
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (12): : 4931 - 4939
  • [44] The Cyclic Oxidation Behaviors of Fe3 (Al, Cr, Zr) and Fe3 (Al, Cr, Nb) Intermetallic Compound at High Temperature
    倪建森
    万晓景
    王庆
    程晓英
    刘为民
    张杏耀
    Journal of Shanghai University, 1997, (01) : 79 - 82
  • [45] Oxidation behaviour of cast Ni-Cr alloys in steam at 800°C
    Essuman, E.
    Walker, L. R.
    Maziasz, J.
    Pint, B. A.
    MATERIALS SCIENCE AND TECHNOLOGY, 2013, 29 (07) : 822 - 827
  • [46] Influence of additional elements on the oxidation behaviour of Nb-Al-Cr base alloys
    Taniguchi, Shigeji
    Tanaka, Hideaki
    Maeda, Tooru
    HIGH-TEMPERATURE OXIDATION AND CORROSION 2005, 2006, 522-523 : 625 - 632
  • [47] The Oxidation Behaviour of Alloys Based on the Ni-Co-Al-Ti-Cr System
    Christofidou, K. A.
    Jones, N. G.
    Hardy, M. C.
    Stone, H. J.
    OXIDATION OF METALS, 2016, 85 (3-4): : 443 - 458
  • [48] CREEP PROPERTIES OF Fe-Al BASED ALLOYS WITH Zr AND C ADDITION
    Hanus, Pavel
    Vodickova, Vera
    Blecha, Jan
    METAL 2010: 19TH INTERNATIONAL METALLURGICAL AND MATERIALS CONFERENCE, 2010, : 911 - 914
  • [49] Chloridation-oxidation of Fe-Cr and Ni-Cr alloys at 800°C
    Zheng, XJ
    Rapp, RA
    OXIDATION OF METALS, 1997, 48 (5-6): : 527 - 551
  • [50] Chloridation-oxidation of Fe-Cr and Ni-Cr alloys at 800°C
    Xuejin Zheng
    Robert A. Rapp
    Oxidation of Metals, 1997, 48 : 527 - 551