Experimental investigation on rockburst process and failure characteristics in trapezoidal tunnel under different lateral stresses

In general, the in-situ stress increases with the increase of excavation depth, and it significantly affects the safe and long-term stability of tunnels and chambers. To study the influence of the in-situ stress on the rockburst process and failure characteristics, three different lateral stresses were loaded to perform biaxial compression experiments on sandstone specimens with a trapezoidal opening. The results indicate that the high lateral stress accelerates the formation of localized damage around the trapezoidal opening, which can effectively consume the elastic strain energy. The deep surrounding rock at the roof and floor are basically in a compressive stress state, and the tangential compressive stress in the deep surrounding rock of the sidewall is greater than that in the deep surrounding rock of the roof and floor, which can cause the deep surrounding rock of the sidewall to be damaged more severely. For the corners of the trapezoidal opening, the high lateral stress can restrain the rotation of the principal stress, which lead to the reduction of the crack density around the corners. AE signals and CT scanning show that the failure mode of the model specimen shifts from tensile fracture to mixed tensile and shear fracture with the increase of the lateral stress. Under different lateral stresses, the outlines of failure zones on both sidewalls of trapezoidal opening are V-shaped, and the damage degree at the sidewall of the trapezoidal opening increases with the increase of the lateral stress when the rockburst occurs. Additionally, the failure zones on both sidewalls are larger than those of circular opening, which indicate that the supporting area on the sidewall of trapezoidal opening needs to be larger than that on the sidewall of circular opening. (C) 2020 Elsevier Ltd. All rights reserved.