Hardening of clayey soil blocks during freezing and thawing cycles

被引:45
|
作者
Aubert, J. E. [1 ]
Gasc-Barbier, M. [2 ]
机构
[1] Univ Toulouse, UPS, INSA, LMDC, F-31077 Toulouse 4, France
[2] French Reg Lab Publ Works, F-31400 Toulouse, France
关键词
Clayey soil blocks; Freezing-thawing cycles; Hardening; Desiccation; COMPRESSED EARTH BLOCKS; STRENGTH; DURABILITY; MASONRY; MORTARS;
D O I
10.1016/j.clay.2012.04.014
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Considering the lack of references dealing with the behaviour of clayey soil blocks subjected to freezing-thawing cycles, exploratory work has been carried out on such blocks to study the effects of freezing-thawing cycles on their mechanical properties. As the blocks were not stabilized, the procedures conventionally applied for freezing-thawing cycles, in which the samples are immersed, were adapted to this case of study: the specimens were humidified by placing them in a moist environment for 1 week (20 degrees C and 95% RH (relative humidity)) and were then subjected to freezing-thawing cycles without any re-humidification between cycles. The variations of weight and compressive wave velocity showed that freezing-thawing cycles led to the desiccation of the samples. The consequences of these cycles on the characteristics of the soil blocks were thus those of a conventional desiccation of specimens and, in particular, their hardening. This hardening was highlighted by the study of the mechanical characteristics of the clayey soil blocks (compressive strength and modulus). (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:1 / 5
页数:5
相关论文
共 50 条
  • [31] Compression and permeability characteristics of expansive soil under drying-wetting-freezing-thawing cycles
    Zhang Ling-kai
    CUI Zi-yan
    ROCK AND SOIL MECHANICS, 2023, 44 (03) : 728 - 740
  • [32] Soil microbial legacies differ following drying-rewetting and freezing-thawing cycles
    Meisner, Annelein
    Snoek, Basten L.
    Nesme, Joseph
    Dent, Elizabeth
    Jacquiod, Samuel
    Classen, Aimee T.
    Prieme, Anders
    ISME JOURNAL, 2021, 15 (04): : 1207 - 1221
  • [33] Study on the Shear Strength Parameters under Different Freezing and Thawing Cycles of Soil Slope in China
    Wu He
    Ge Qi
    Tian Jingbo
    ENERGY DEVELOPMENT, PTS 1-4, 2014, 860-863 : 1280 - +
  • [34] Modelling the deformation behaviour of an unsaturated soil reinforced with geocell for different freezing-thawing cycles
    Dave, Bhavita Subhashbhai
    Solanki, Chandresh H.
    Desai, Atul K.
    INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2022, 7 (02)
  • [35] Soil microbial legacies differ following drying-rewetting and freezing-thawing cycles
    Annelein Meisner
    Basten L. Snoek
    Joseph Nesme
    Elizabeth Dent
    Samuel Jacquiod
    Aimée T. Classen
    Anders Priemé
    The ISME Journal, 2021, 15 : 1207 - 1221
  • [36] Study on the Shear Strength Parameters under Different Freezing and Thawing Cycles of Soil Slope in China
    Wu He
    Ge Qi
    Tian Jingbo
    RESEARCH ON MECHANICAL ENGINEERING, CIVIL ENGINEERING AND MATERIAL ENGINEERING, 2014, 454 : 222 - +
  • [37] AN EXPERIMENT STUDY OF EFFECTS OF FREEZING-THAWING CYCLES ON WATER AND SALT MIGRATION OF SALINE SOIL
    Wang, Gang
    Wang, Qing
    Zhang, Xudong
    Wang, Wenhua
    Li, Chaoyue
    FRESENIUS ENVIRONMENTAL BULLETIN, 2018, 27 (02): : 1060 - 1068
  • [38] Soil phosphorus availability in no-till versus conventional tillage following freezing and thawing cycles
    Messiga, Aime Jean
    Ziadi, Noura
    Morel, Christian
    Parent, Leon-Etienne
    CANADIAN JOURNAL OF SOIL SCIENCE, 2010, 90 (03) : 419 - 428
  • [39] Research on the mechanical properties of the cement-modified soil under the action of freezing and thawing cycles
    Wang, Tianliang
    Liu, Jiankun
    Peng, Liyun
    Tian, Yahu
    Zhongguo Tiedao Kexue/China Railway Science, 2010, 31 (06): : 7 - 13
  • [40] EFFECTS OF FREEZING AND THAWING CYCLES ON THE ENGINEERING PROPERTIES OF SOILS
    Ozgan, E.
    Serin, S.
    Erturk, S.
    Vural, I.
    SOIL MECHANICS AND FOUNDATION ENGINEERING, 2015, 52 (02) : 95 - 99