Study of Alloying Process on 40Cr Surface with Electron Beam after Electroplated Cr Layer

被引：0
|
作者：
Xu Hongbin [1 ]
Hu Jianjun [1 ]
Li Hui [1 ]
Mao Rongshan [1 ]
Sun Fei [1 ]
Hou Tianfeng [1 ]
机构：
[1] Chongqing Univ Technol, Chongqing 400054, Peoples R China
来源：
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING | 2013年 / 2013卷
基金：
中国国家自然科学基金;
关键词：
ENERGY;
D O I：
10.1155/2013/984231
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The electroplated hard chromium coat was selected as precoating to improve surface properties of 40Cr. Then electron beam alloying process was experimentalized. The relation rules were summarized between alloying process parameters and overall surface properties by surface morphology observation, surface energy spectrum analysis, EDX analysis in section, and XRD. Experiment results showed that the microcracks appeared on surface of electron beam alloying specimen. Microcracks could disappear when the orthogonal experimental optimum process was used. The matrix metal elements diffused into metal coating surface after electron beam treatment. The maximum depth of alloyed layer could reach 8 mu m after electron beam alloying treatment, and electron beam alloying process generated new residual austenite phase.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Numerical Simulation on the Surface Layer Hardness of 40Cr Steel in Grind-Hardening
    Huang, Tian-Cheng
    Zhang, Jin-Yi
    Wang, Gui-Cheng
    PROCEEDINGS OF THE 4TH 2016 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING (ICMSE 2016), 2016, 101 : 432 - 439
  • [22] Experimental study on super-high speed grinding process of 40Cr
    State Engineering Research Center for High Efficiency Grinding, Hunan Univ., Changsha 410082, China
    Hunan Daxue Xuebao, 2007, 10 (39-43):
  • [23] Microstructure characteristics and properties of 40Cr steel treated by high current pulsed electron beam
    Hu, J. J.
    Zhang, G. B.
    Xu, H. B.
    Chen, Y. F.
    MATERIALS TECHNOLOGY, 2012, 27 (04) : 300 - 303
  • [24] Process characterization of 40Cr Steel Roller by Laser Surface Alloying with Rare Earths Oxide Y2O3
    Wu, Anqi
    Liu, Qibin
    Qin, Shuijie
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 520 - +
  • [25] Optimization of Laser Shock Process Parameters for 40Cr Steel
    Chen, Xiuyu
    Sun, Jie
    Xu, Zhilong
    Chen, Junying
    Jiang, Qingshan
    Li, Yi
    Li, Jiayuan
    Cheng, Jun
    COATINGS, 2022, 12 (12)
  • [26] Causes and Countermeasures of Cracking in Cogging Process of 40Cr Bloom
    Cheng, Changgui
    Wan, Wencheng
    Liu, Zhongtian
    Zheng, Yongrui
    ADVANCES IN METALLURGICAL AND MINING ENGINEERING, 2012, 402 : 111 - +
  • [27] Study on the microstructure and property of 40Cr steel treated by broad beam laser hardening
    Jinshu Rechuli Xuebao, 1 (24-27):
  • [28] Study on forming mechanism of microstructure on the grind-hardened layer of 40Cr steel
    Liu, Ju-Dong
    Hou, Da-Pan
    Wang, Da-Zhen
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (SUPPL.): : 41 - 45
  • [29] Experiment and simulation on temperature field of 40Cr steel surface layer in grind-hardening
    Zhang, L.
    Ge, P. Q.
    Zhang, J. H.
    Zhu, Z. J.
    Luan, Z. Y.
    ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, 2006, : 593 - +
  • [30] Experiment and Simulation of Surface Layer Micro-Hardness in Grind-Hardening 40Cr
    Huang, T. C.
    Zhang, J. Y.
    Wang, G. C.
    INTERNATIONAL CONFERENCE ON MATERIALS PROCESSING AND MECHANICAL MANUFACTURING ENGINEERING (MPMME 2015), 2015, : 283 - 291
12345