Microstructure evolution of TiAl matrix in the process of magnetron sputtering and hot isostatic pressing for fabricating TiAl/SiCf composites

被引：10
|
作者：
Zhang, W. [1 ]
Yang, Y. Q. [1 ]
Zhao, G. M. [1 ]
Huang, B. [1 ]
Li, M. H. [1 ]
Luo, X. [1 ]
Ouyang, S. [1 ]
机构：
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
来源：
INTERMETALLICS | 2013年 / 39卷
关键词：
Composites; Titanium aluminides; based on TiAl; Microstructure; Diffraction; Electron microscopy; transmission; INTERFACIAL REACTION;
D O I：
10.1016/j.intermet.2013.03.010
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The microstructures of titanium aluminides matrix based on TiAl both in matrix-coated fiber and in fiber-reinforced composites were studied in this paper. The titanium aluminides matrix was examined by means of scanning electron microscope, X-ray diffractometer and transmission electron microscope. The results show that, in sputtering process, amorphous phase forms firstly, and alpha-Ti(Al) + TiAl3 form later. Subsequently, during hot isostatic pressing, the amorphous phase, alpha-Ti(Al) and TiAl3 in the matrix-coated fibers transform into gamma-TiAl and alpha(2)-Ti3Al in the composites. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：5 / 10
页数：6
相关论文
共 50 条
  • [21] The phase transformation and microstructure of TiAl/Ti2AlC composites caused by hot pressing
    Chen Yan-Lin
    Yan Ming
    Sun Yi-Ming
    Mei Bing-Chu
    Zhu Jiao-Qun
    CERAMICS INTERNATIONAL, 2009, 35 (05) : 1807 - 1812
  • [22] Mechanics of hot isostatic pressing in intermetallic matrix composites
    Cairo Univ, Giza, Egypt
    J Mater Sci, 1 (1-23):
  • [23] MECHANICS OF HOT ISOSTATIC PRESSING IN INTERMETALLIC MATRIX COMPOSITES
    BAHEIELDIN, YA
    DVORAK, GJ
    WU, JF
    JOURNAL OF MATERIALS SCIENCE, 1995, 30 (01) : 1 - 23
  • [24] Preparation of Dense TiAl Intermetallics by Cold Spraying the Precursor-Hot Isostatic Pressing
    Ma, Jiayan
    Chu, Xin
    Xie, Yingchun
    Li, Jizhan
    Liu, Min
    Huang, Jiwu
    COATINGS, 2024, 14 (08)
  • [25] Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys
    Bernal, Daniel
    Chamorro, Xabier
    Hurtado, Inaki
    Lopez-Galilea, Inmaculada
    Burger, David
    Weber, Sebastian
    Madariaga, Inaki
    MATERIALS, 2022, 15 (12)
  • [26] Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing
    Farkoush, Hanieh Bakhshi
    Marchese, Giulio
    Bassini, Emilio
    Aversa, Alberta
    Biamino, Sara
    MATERIALS, 2023, 16 (16)
  • [27] Microstructure and mechanical properties of hot work tool steel matrix composites produced by hot isostatic pressing
    Helsinki Univ of Technology, Espoo, Finland
    Powder Metall, 1 (55-61):
  • [28] Microstructure and mechanical properties of hot work tool steel matrix composites produced by hot isostatic pressing
    Pagounis, E
    Talvitie, M
    Lindroos, VK
    POWDER METALLURGY, 1997, 40 (01) : 55 - 61
  • [29] Hot isostatic pressing of metal reinforced metal matrix composites
    A. L. FILHO
    H. ATKINSON
    H. JONES
    E. DE LOS RIOS
    S. KING
    Journal of Materials Science, 1998, 33 : 5517 - 5533
  • [30] Hot isostatic pressing of metal reinforced metal matrix composites
    Filho, AL
    Atkinson, H
    Jones, H
    De los Rios, E
    King, S
    JOURNAL OF MATERIALS SCIENCE, 1998, 33 (23) : 5517 - 5533
12345