Effect of Heat Treatment on the Microstructure and Properties of a Ti3Al Linear Friction Welding Joint

被引：7
|
作者：
Li, Xiaohong [1 ,2 ]
He, Jianchao [2 ]
Zhang, Tiancang [2 ]
Tao, Jun [2 ]
Li, Ju [2 ]
Zhang, Yanhua [1 ]
机构：
[1] Beihang Univ, Sch Mech Engn & Automat, Beijing 100191, Peoples R China
[2] AVIC Mfg Technol Inst, Aeronaut Key Lab Welding & Joining Technol, Beijing 100024, Peoples R China
来源：
MATERIALS | 2019年 / 12卷 / 07期
关键词：
intermetallic compound; linear friction welding; microstructure; heat treatment; MECHANICAL-PROPERTIES; EVOLUTION; MULTISCALE; TI-6AL-4V; TI17;
D O I：
10.3390/ma12071159
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Heat treatment at different temperatures was carried out on a Ti3Al linear friction welding joint. The characteristics and evolution of the microstructure in the weld zone (WZ) and the thermo-mechanically affected zone (TMAZ) of the Ti3Al LFW joint were analyzed. Combined with the heat treatment after welding, the effect of the heat treatment temperature on the joint was discussed. The test results indicated that the linear friction welding (LFW) process can accomplish a reliable connection between Ti3Al alloys and the joint can avoid defects such as microcracks and voids. The weld zone of the as-welded Ti3Al alloy joint was mainly composed of metastable phase, while the TMAZ was mainly composed of deformed (2) phase and metastable phase. After being heat treated at different temperatures, the WZ of the Ti3Al LFW joint exhibited a significantly different microstructure. After heat treatment at 700 degrees C, dot-like structures precipitated and the joint microhardness increased significantly. Subsequently, the joint microhardness decreases with the increase in temperature. Under heat treatment at temperatures above 850 degrees C, the formed structure was acicular (2) phase and the joint microhardness after heat treatment was lower than that of the as-welded joint.
引用
收藏
页数：12
相关论文
共 50 条
  • [41] A SHORT NOTE ON THE MICROSTRUCTURE OF TIAL/TI3AL
    FENG, CR
    MICHEL, DJ
    CROWE, CR
    SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (02): : 239 - 240
  • [42] Microstructure and In Situ Tensile Mechanical Properties of Ti/Al3Ti Composites Prepared by "Explosive Welding plus Heat Treatment"
    Hu, Xiaoyan
    Liu, Yingbin
    Wu, Yuzhi
    Yan, Xiaopeng
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (03) : 821 - 830
  • [43] Interfacial microstructure and mechanical properties of the Al/Ti joint by magnetic pulse welding
    Xie, Jilin
    Zhang, Wentao
    Chen, Yuhua
    Zhang, Liping
    Yin, Limeng
    Zhang, Timing
    Wang, Shanlin
    MATERIALS CHARACTERIZATION, 2022, 194
  • [44] Influence of Microstructure Change on the Superplastic Properties of Ti3Al Base Alloy
    Liu, Yingying
    Yao, Zekun
    Luo, Xi
    Cao, Likun
    ADVANCED MATERIALS AND PROCESSING, 2007, 26-28 : 177 - +
  • [45] THE EFFECT OF TERNARY ADDITIONS ON THE CRYSTAL-STRUCTURE AND MICROSTRUCTURE OF TI3AL
    MUNROE, PR
    MATERIALS FORUM, 1993, 17 (02): : 159 - 166
  • [46] EFFECT OF HYDROGEN AS A TEMPORARY ALLOYING ELEMENT ON THE MICROSTRUCTURE OF A TI3AL INTERMETALLIC
    YANG, K
    EDMONDS, DV
    SCRIPTA METALLURGICA ET MATERIALIA, 1993, 28 (01): : 71 - 76
  • [47] Effect of LaB6 addition on the microstructure and properties of (Ti3Al + TiB)/Ti composites by laser cladding
    Feng, Yueqiao
    Feng, Kai
    Yao, Chengwu
    Li, Zhuguo
    MATERIALS & DESIGN, 2019, 181
  • [48] Effect of post-weld heat treatment on microstructure and property of linear friction welded Ti17 titanium alloy joint
    Ma, T. J.
    Li, W. Y.
    Zhong, B.
    Zhang, Y.
    Li, J. L.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (03) : 180 - 185
  • [49] Linear friction welding of Ti-6Al-4V alloy: Microstructure characterization
    Ma, T. J.
    Li, W. -Y.
    Xu, Q. Z.
    Zhang, Y.
    Li, J. L.
    Yang, S. Q.
    ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 405 - 408
  • [50] Microstructure and properties of dissimilar materials Mg/Al laped joint by friction stir welding
    Chen, Y. (lndlflying@126.com), 2012, Harbin Research Institute of Welding (33):
12345