Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components

被引：79

作者：

Lambarri, Jon ^{[1
]}

Leunda, Josu ^{[1
]}

Garcia Navas, Virginia ^{[1
]}

Soriano, Carlos ^{[1
]}

Sanz, Carmen ^{[1
]}

机构：

[1] IK4 Tekniker, Adv Mfg Technol Unit, Eibar 20600, Gipuzkoa, Spain

来源：

OPTICS AND LASERS IN ENGINEERING | 2013年 / 51卷 / 07期

关键词：

Laser cladding; Heat treatment; Inconel; 718; Microstructure; Mechanical properties;

D O I：

10.1016/j.optlaseng.2013.01.011

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

The suitability of the laser cladding technique for manufacturing and repairing aeronautic components of Inconel 718 was evaluated. Multilayer coatings were deposited on Inconel 718 plates, using a continuous wave Nd:YAG laser. The microstructure of the laser cladding samples was investigated using optical and scanning electron microscopy and microhardness profiles were measured after different heat treatment stages. Finally, tensile tests were carried out on fully aged samples extracted from a massive multilayer coating. It was proven that the resulting coatings satisfy the industrial requirements for aeronautic applications, with mechanical properties well above the minimum specified values and with no detrimental phases or precipitates left after the heat treatment. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：813 / 821

页数：9

共 50 条

[21] Tensile properties of laser additive manufactured Inconel 718 using filler wire
Zhang, Yi-Nan
Cao, Xinjin
Wanjara, Priti
Medraj, Mamoun
JOURNAL OF MATERIALS RESEARCH, 2014, 29 (17) : 2006 - 2020
[22] TENSILE AND FATIGUE BEHAVIOR OF DIRECT METAL LASER SINTERED (DMLS) INCONEL 718
Kelley, Paul F.
Saigal, Anil
Vlahakis, James K.
Carter, Andrew
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 2A, 2016,
[23] In situ synthesis and characterization of ceramic reinforced Inconel 718 coatings using B4C-Inconel 718 powders by laser-directed energy deposition
Yunze Li
Dongzhe Zhang
Bo Zhao
Weilong Cong
The International Journal of Advanced Manufacturing Technology, 2022, 120 : 5193 - 5203
[24] In situ synthesis and characterization of ceramic reinforced Inconel 718 coatings using B4C-Inconel 718 powders by laser-directed energy deposition
Li, Yunze
Zhang, Dongzhe
Zhao, Bo
Cong, Weilong
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (7-8): : 5193 - 5203
[25] Tensile properties of laser additive manufactured Inconel 718 using filler wire
Yi-Nan Zhang
Xinjin Cao
Priti Wanjara
Mamoun Medraj
Journal of Materials Research, 2014, 29 : 2006 - 2020
[26] Tensile properties of laser additive manufactured Inconel 718 using filler wire
National Research Council Canada - Aerospace, Montreal
QC
H3T 2B2, Canada
不详
QC
H3G 1M8, Canada
J Mater Res, 4 (2006-2020):
[27] Influence of Scan orientation Strategy on microstructural and tensile characteristics of Inconel 718 fabricated by DMLS process
Bintu Sumanth K.
Srinivasan V.
Materials Today: Proceedings, 2023, 76 : 624 - 629
[28] Effect of solutionizing and double ageing treatments on the microstructural characteristics and tensile properties of Inconel 718 welds
Ramkumar, K. Devendranath
Arvind, A. Vishnu
Aravinth, K. V. Rama
Srivatson, E.
Ganguly, Supriyo
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 6255 - 6265
[29] Controlling microstructural and mechanical properties of direct laser deposited Inconel 718 via laser power
Alhuzaim, Abdullah
Imbrogno, Stano
Attallah, Moataz M.
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 872
[30] The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting
McLouth, Tait D.
Bean, Glenn E.
Witkin, David B.
Sitzman, Scott D.
Adams, Paul M.
Patel, Dhruv N.
Park, Woonsup
Yang, Jenn-Ming
Zaldivar, Rafael J.
MATERIALS & DESIGN, 2018, 149 : 205 - 213

← 1 2 3 4 5 →