Dry sliding wear behavior of in situ Al-Al4C3 metal matrix composite produced by mechanical alloying technique

被引：33
|
作者：
Arik, Halil [1 ]
Ozcatalbas, Yusuf [1 ]
Turker, Mehmet [1 ]
机构：
[1] Gazi Univ, Tech Educ Fac, Dept Met, TR-06500 Ankara, Turkey
来源：
MATERIALS & DESIGN | 2006年 / 27卷 / 09期
关键词：
metal matrix composite; Al-Al4C3; composites; in situ; mechanical alloyed; sliding wear;
D O I：
10.1016/j.matdes.2005.01.024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dry sliding wear behavior of in situ Al-Al4C3 Composite produced by mechanical alloying technique was examined. Mechanically alloyed Al-C powders were compacted at 650 MPa to produce the blanks with the size of phi 10 x 25 mm. These blanks were then sintered at 650 degrees C for 20 h and MMC samples with the density of 92% and the hardness of 314 Hv were produced. Dry sliding behavior of the produced Al-Al4C3 composite was examined by using pin-on-disk technique. In the case of low applying force, Fe based stable mechanical mixed layer was formed on the pin surface and which decreased the wear rate. However, high applied force resulted in the formation of mechanical deformed layer on the surface of samples which facilities the wear rate. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：799 / 804
页数：6
相关论文
共 50 条
  • [21] Tensile and Dry Sliding Wear Behavior of In-Situ Al3Zr + Al2O3-Reinforced Aluminum Metal Matrix Composites
    Gautam, G.
    Ghose, A. K.
    Chakrabarty, I.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (12): : 5952 - 5961
  • [22] Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering
    Wang, Jian
    Xing, Jiandong
    Cao, Li
    Su, Wei
    Gao, Yimin
    WEAR, 2010, 268 (3-4) : 473 - 480
  • [23] Effect of strengthening particles on the dry sliding wear behavior of Al2O3-M7C3/Fe metal matrix composite coatings produced by laser cladding
    Tan, H.
    Luo, Z.
    Li, Y.
    Yan, F.
    Duan, R.
    Huang, Y.
    WEAR, 2015, 324 : 36 - 44
  • [24] EFFECT OF SOLUTIONIZING ON DRY SLIDING WEAR OF AL2024-BERYL METAL MATRIX COMPOSITE
    Bhaskar, H. B.
    Sharief, Abdul
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2012, 3 : 281 - 290
  • [25] Microstructure and Dry-Sliding Wear Behavior of B4C Ceramic Particulate Reinforced Al 5083 Matrix Composite
    Zhao, Qian
    Liang, Yunhong
    Zhang, Zhihui
    Li, Xiujuan
    Ren, Luquan
    METALS, 2016, 6 (09):
  • [26] In situ tensile testing in SEM of Al-Al4C3 nanomaterials
    Besterci, Michal
    Velgosová, Oksana
    Ivan, Jozef
    Hvizdoš, Pavol
    Kvačkaj, Tibor
    Kulu, Priit
    Estonian Journal of Engineering, 2009, 15 (04): : 247 - 254
  • [27] Parametric Study of Dry Sliding Wear Behavior of Hybrid Metal Matrix Composite Produced by a Novel Process
    Pardeep Sharma
    Satpal Sharma
    Dinesh Khanduja
    Metallurgical and Materials Transactions A, 2015, 46 : 3260 - 3270
  • [28] Parametric Study of Dry Sliding Wear Behavior of Hybrid Metal Matrix Composite Produced by a Novel Process
    Sharma, Pardeep
    Sharma, Satpal
    Khanduja, Dinesh
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (07): : 3260 - 3270
  • [29] Influence of process and test parameters on the dry sliding wear behaviour of Al-Pb alloys produced by mechanical alloying
    Sastry, Ch. V. S. H. S. R.
    Janardhana, G. Ranga
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2010, 4 (4-6) : 377 - 395
  • [30] Mechanical properties of individual phases, deformation and fracture in mechanically alloyed Al-Al4C3 composite
    Besterci, Michal
    Velgosova, Oksana
    Pesek, Ladislav
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2007, 28 (3-4): : 448 - 467
12345