The effect of mechanical alloying on SiC distribution and the properties of 6061 aluminum composite

被引：129
|
作者：
Zhao, NQ [1 ]
Nash, P
Yang, XJ
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China
[2] IIT, Thermal Proc Technol Ctr, Chicago, IL 60616 USA
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2005年 / 170卷 / 03期
关键词：
mechanical alloying; aluminum; SiC; composite;
D O I：
10.1016/j.jmatprotec.2005.06.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
6061 Aluminum alloy reinforced with 8 vol.% SiC particulate composite was produced by P/M processing. Mechanical alloying (MA) technique was used to mill the blended powder under argon. The results of MA processing have been investigated with SEM, EDS, OM, XRD. C The results show that relatively homogeneous distribution of SiCp reinforcement in the matrix could be obtained by mechanical alloying technique after 5 h. MA processing has some disadvantages, such as low compressibility of the powder and gas contamination, both of which affect the integrity of sintering. A degassing procedure is suggested to improve the compressibility and sintering. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：586 / 592
页数：7
相关论文
共 50 条
  • [41] Effect of Graphite on Mechanical and Tribological Properties of Al6061/SiC Hybrid Composites
    Papabathina, Mastan Rao
    Chinka, Siva Sankara Babu
    Putta, Nageswara Rao
    Vijaya, Murkonda
    Dhoria, Sneha. H.
    Chilakala, Deva Raj
    Jarubula, Ranga Raya Chowdary
    Kancharla, Praveen Kumar
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2023, 47 (03): : 125 - 132
  • [42] Effect of SiC Particles on the Machining of Aluminum/SiC Composite
    Zhang, G. F.
    Tan, Y. Q.
    Zhang, B.
    Deng, Z. H.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION, 2009, 626-627 : 219 - +
  • [43] Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite
    Ye, Tengke
    Xu, Yuxin
    Ren, Jie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 753 : 146 - 155
  • [44] Effect of heat treatment on the mechanical properties of aluminum-borate whisker reinforced 6061 aluminum alloy
    Saito, Naobumi, 1600, (44):
  • [45] EFFECT OF HEAT TREATMENT ON METALLURGICAL AND MECHANICAL PROPERTIES OF AN ALUMINIUM 6061 HYBRID COMPOSITE
    Devaenthiran, Pradeep
    Thirupathi, Rameshkumar
    MATERIALI IN TEHNOLOGIJE, 2024, 58 (05): : 555 - 560
  • [46] Effect of SiC Particles on Mechanical Properties of Aluminum ADC12 Composite through Stir Casting Process
    Josiah
    Zulfia, Anne
    PROCEEDINGS OF THE 3RD INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM 2019): EXPLORING NEW INNOVATION IN METALLURGY AND MATERIALS, 2020, 2232
  • [47] Stir casted SiC-Gr/Al6061 hybrid composite tribological and mechanical properties
    Sabry, Ibrahim
    Ghafaar, M. Abdel
    Mourad, Abdel-Hamid Ismail
    Idrisi, Amir Hussain
    SN APPLIED SCIENCES, 2020, 2 (05):
  • [48] Stir casted SiC-Gr/Al6061 hybrid composite tribological and mechanical properties
    Ibrahim Sabry
    M. Abdel Ghafaar
    Abdel-Hamid Ismail Mourad
    Amir Hussain Idrisi
    SN Applied Sciences, 2020, 2
  • [49] EFFECT OF MECHANICAL ALLOYING ON AL6061-GRAPHENE COMPOSITE FABRICATED BY SEMI-SOLID POWDER PROCESSING
    Bastwros, Mina
    Kim, Gap-Yong
    Zhu, Can
    Zhang, Kun
    Wang, Shiren
    PROCEEDINGS OF THE ASME 8TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2013, VOL 2, 2013,
  • [50] Effect of SiC particle size on the mechanical properties of closed aluminum foams
    Afshar, Maral
    Mirbagheri, Mohammad Hosein
    Movahedi, Nima
    MATERIALS TESTING, 2017, 59 (06) : 571 - 574
12345