The effect of sodium (Na) doping on the performance of n-Si/Cu2SnS3 heterojunction solar cells deposited by PLD using a homemade target.

被引:5
|
作者
Houimi, Amina [1 ]
Gezgin, Serap Yigit [2 ]
Kilic, Hamdi Sukur [2 ,3 ,4 ]
机构
[1] Selcuk Univ, Dept Nano technol & Adv Mat, Fac Sci, TR-42031 Konya, Turkey
[2] Selcuk Univ, Dept Phys, Fac Sci, TR-42031 Konya, Turkey
[3] Selcuk Univ, Directorate High Technol Res & Applicat Ctr, TR-42031 Konya, Turkey
[4] Selcuk Univ, Directorate Laser Induced Proton Therapy Applicat, TR-42031 Konya, Turkey
来源
OPTIK | 2022年 / 264卷
关键词
Cu2SnS3; Thin films; PLD; Solar cells heterojunction; CU2SNS3; THIN-FILMS; OPTICAL-PROPERTIES; STRUCTURAL-CHARACTERIZATION; ANNEALING TEMPERATURE; CU2ZNSNS4; GROWTH; CTS; FABRICATION; CU(IN; GA)SE-2; SULFURIZATION;
D O I
10.1016/j.ijleo.2022.169364
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
n-Si/Cu2SnS3(CTS) heterojunction solar cell has been fabricated in this work using different doping concentration of Na into CTS thin films. The pure raw powders of Copper, Tin, Sulphur and NaF have been ball milled, pressed and heated to form CTS pure and Na doped targets. The deposition of CTS thin film pure beside 1%, 3% and 5% Na doped CTS thin film have been held by pulsed laser deposition technique. The different properties of CTS thin films have been studied using different analyse methods and it has been observed that the properties of these CTS thin films are strongly dependent on Na concentration. Doping CTS thin films with 1% Na has enhanced the crystallinity and the optical absorption. The solar cells based on n-Si/p-CTS heterojunction present different power conversion efficiency according to Na concentration in CTS thin films. The best photovoltaic performance has been obtainable by Al/n-Si/CTS(1%Na doped)/Ag solar cell with open circuit voltage of 300 mV and power conversion efficiency of 1.02%.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] Performance assessment of Cu2SnS3 (CTS) based thin film solar cells by AMPS-1D
    Hossain, Ejarder Sabbir
    Chelvanathan, Puvaneswaran
    Shahahmadi, Seyed Ahmad
    Sopian, Kamaruzzaman
    Bais, Badariah
    Amin, Nowshad
    CURRENT APPLIED PHYSICS, 2018, 18 (01) : 79 - 89
  • [22] Cu2SnS3 thin films deposited by spin coating route: a promise candidate for low cost, safe and flexible solar cells
    H. Dahman
    L. El Mir
    Journal of Materials Science: Materials in Electronics, 2015, 26 : 6032 - 6039
  • [23] Cu2SnS3 thin films deposited by spin coating route: a promise candidate for low cost, safe and flexible solar cells
    Dahman, H.
    El Mir, L.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (08) : 6032 - 6039
  • [24] Optimization and fabrication of low cost Cu2SnS3/ZnS thin film heterojunction solar cell using ultrasonic spray pyrolysis
    Rahaman, Sabina
    Sunil, M. Anantha
    Singha, Monoj Kumar
    Ghosh, Kaustab
    OPTICAL MATERIALS, 2022, 123
  • [25] Effect of BaSi2 template growth duration on the generation of defects and performance of p-BaSi2/n-Si heterojunction solar cells
    Yachi, Suguru
    Takabe, Ryota
    Deng, Tianguo
    Toko, Kaoru
    Suemasu, Takashi
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2018, 57 (04)
  • [26] The effects of insulator thickness and substrate doping density on the performance of ZnO/SiO2/n-Si solar cells
    Noor, Fatimah A.
    Oktasendra, Fandi
    Sustini, Euis
    Khairurrijal, Khairurrijal
    MATERIALS TECHNOLOGY, 2018, 33 (14) : 865 - 871
  • [27] Fabrication of Cu2SnS3 thin film solar cells using Cu/Sn layered metallic precursors prepared by a sputtering process
    Lee, Ju Yeon
    Kim, In Young
    Surywanshi, Mahesh P.
    Ghorpade, Uma V.
    Lee, Dong Seon
    Kim, Jin Hyeok
    SOLAR ENERGY, 2017, 145 : 27 - 32
  • [28] Effects of sputtering pressure and temperature of ITO electrodes on the performance of p-BaSi2/n-Si heterojunction solar cells
    Sugiyama, Ryota
    Yamashita, Yudai
    Toko, Kaoru
    Suemasu, Takashi
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2020, 59
  • [29] Effect of sulfurization temperature on properties of Cu2SnS3 thin films and solar cells prepared by sulfurization of stacked metallic precursors
    Dong, Yuchen
    He, Jun
    Sun, Lin
    Chen, Ye
    Yang, Pingxiong
    Chu, Junhao
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2015, 38 : 171 - 176
  • [30] The effect of different Cu/Sn ratios on the properties of monoclinic Cu2SnS3 thin films and solar cells fabricated by the sol–gel method
    Jie Wu
    Chunhui Gao
    Lu Han
    Shanshan Shen
    Ming Jia
    Li Wang
    Liangxing Jiang
    Fangyang Liu
    Journal of Materials Science: Materials in Electronics, 2019, 30 : 4378 - 4384