Effect of a Pulsed Magnetic Field on the Structure and Properties of AlSi10Mg Alloy Plates Produced by Selective Laser Melting

被引：0
|
作者：
Glushchenkov, V. A. [1 ]
Khaimovich, A. I. [1 ]
Kolmakov, A. G. [2 ]
Sargaeva, T. S. [1 ]
Razzhivin, V. A. [1 ]
Shvetsov, A. N. [1 ]
Yusupov, R. Yu. [1 ]
机构：
[1] Samara Natl Res Univ, Samara 443086, Russia
[2] Russian Acad Sci, Baikov Inst Met & Mat Sci, Moscow 119334, Russia
来源：
RUSSIAN METALLURGY | 2023年 / 2023卷 / 10期
基金：
俄罗斯科学基金会;
关键词：
pulsed magnetic field; structure; microhardness; residual stresses; selective laser melting; aluminum alloy; TENSILE PROPERTIES; MICROSTRUCTURE;
D O I：
10.1134/S0036029523100087
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of a pulsed magnetic field (PMF) on the structure and properties of AlSi10Mg alloy plates produced by selective laser melting is studied. The action of a PMF is found to favor the formation of compressive stresses at the plate surface, which positively affects the strength of products. At a pulse current of approximate to 26 kA, the microhardness increases by 30-40% as compared to the state before PMF processing.
引用
收藏
页码：1458 / 1461
页数：4
相关论文
共 50 条
  • [31] Effect of build orientation on fracture behaviour of AlSi10Mg produced by selective laser melting
    AlRedha, Sultan
    Shterenlikht, Anton
    Mostafavi, Mahmoud
    Van Gelderen, Derreck
    Lopez-Botello, Omar Eduardo
    Reyes, Luis Arturo
    Zambrano, Patricia
    Garza, Carlos
    RAPID PROTOTYPING JOURNAL, 2021, 27 (01) : 112 - 119
  • [32] Selective laser melting of 2024-modified AlSi10Mg alloy
    Jia Z.-Q.
    Gao T.
    Wang G.-L.
    Liu X.-F.
    Zhao G.-Q.
    Wang X.-B.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2022, 32 (11): : 3257 - 3267
  • [33] Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy
    Wang, Zhaoyi
    Yue, Deyu
    Li, Dongming
    Chen, Bingzhi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 135 (5-6): : 2173 - 2189
  • [34] Influence of Selective Laser Melting Machine Source on the Dynamic Properties of AlSi10Mg Alloy
    Amir, Ben
    Samuha, Shmuel
    Sadot, Oren
    MATERIALS, 2019, 12 (07)
  • [35] Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
    M. V. Gerov
    E. Yu. Vladislavskaya
    V. F. Terent’ev
    D. V. Prosvirnin
    O. S. Antonova
    A. G. Kolmakov
    Russian Metallurgy (Metally), 2019, 2019 : 392 - 397
  • [36] Dynamic response of AlSi10Mg alloy fabricated by selective laser melting
    Zaretsky, E.
    Stern, A.
    Frage, N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 688 : 364 - 370
  • [37] On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
    Trevisan, Francesco
    Calignano, Flaviana
    Lorusso, Massimo
    Pakkanen, Jukka
    Aversa, Alberta
    Ambrosio, Elisa Paola
    Lombardi, Mariangela
    Fino, Paolo
    Manfredi, Diego
    MATERIALS, 2017, 10 (01):
  • [38] Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings
    Pezzato, L.
    Dabala, M.
    Gross, Silvia
    Brunelli, K.
    SURFACE & COATINGS TECHNOLOGY, 2020, 404
  • [39] Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
    Gerov, M. V.
    Vladislavskaya, E. Yu.
    Terent'ev, V. F.
    Prosvirnin, D. V.
    Antonova, O. S.
    Kolmakov, A. G.
    RUSSIAN METALLURGY, 2019, 2019 (04): : 392 - 397
  • [40] Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM)
    Leon, Avi
    Aghion, Eli
    MATERIALS CHARACTERIZATION, 2017, 131 : 188 - 194
12345