Effect of a Pulsed Magnetic Field on the Structure and Properties of AlSi10Mg Alloy Plates Produced by Selective Laser Melting

被引：0
|
作者：
Glushchenkov, V. A. [1 ]
Khaimovich, A. I. [1 ]
Kolmakov, A. G. [2 ]
Sargaeva, T. S. [1 ]
Razzhivin, V. A. [1 ]
Shvetsov, A. N. [1 ]
Yusupov, R. Yu. [1 ]
机构：
[1] Samara Natl Res Univ, Samara 443086, Russia
[2] Russian Acad Sci, Baikov Inst Met & Mat Sci, Moscow 119334, Russia
来源：
RUSSIAN METALLURGY | 2023年 / 2023卷 / 10期
基金：
俄罗斯科学基金会;
关键词：
pulsed magnetic field; structure; microhardness; residual stresses; selective laser melting; aluminum alloy; TENSILE PROPERTIES; MICROSTRUCTURE;
D O I：
10.1134/S0036029523100087
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of a pulsed magnetic field (PMF) on the structure and properties of AlSi10Mg alloy plates produced by selective laser melting is studied. The action of a PMF is found to favor the formation of compressive stresses at the plate surface, which positively affects the strength of products. At a pulse current of approximate to 26 kA, the microhardness increases by 30-40% as compared to the state before PMF processing.
引用
收藏
页码：1458 / 1461
页数：4
相关论文
共 50 条
  • [1] Effect of a Pulsed Magnetic Field on the Structure and Properties of AlSi10Mg Alloy Plates Produced by Selective Laser Melting
    V. A. Glushchenkov
    A. I. Khaimovich
    A. G. Kolmakov
    T. S. Sargaeva
    V. A. Razzhivin
    A. N. Shvetsov
    R. Yu. Yusupov
    Russian Metallurgy (Metally), 2023, 2023 : 1458 - 1461
  • [2] AlSi10Mg Alloy Samples Produced by Selective Laser Melting
    Orekhov A.A.
    Rabinskiy L.N.
    Tereshchenko T.S.
    Russian Engineering Research, 2024, 44 (03) : 383 - 388
  • [3] Mechanical properties of AlSi10Mg produced by Selective Laser Melting
    Kempen, K.
    Thijs, L.
    Van Humbeeck, J.
    Kruth, J. -P.
    LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012), 2012, 39 : 439 - 446
  • [4] Friction Stir Welding of AlSi10Mg Plates Produced by Selective Laser Melting
    Scherillo F.
    Astarita A.
    Prisco U.
    Contaldi V.
    di Petta P.
    Langella A.
    Squillace A.
    Metallography, Microstructure, and Analysis, 2018, 7 (4) : 457 - 463
  • [5] Structure and Mechanical Properties of the AlSi10Mg Alloy Samples Manufactured by Selective Laser Melting
    Li, Xiaodan
    Ni, Jiaqiang
    Zhu, Qingfeng
    Su, Hang
    Cui, Jianzhong
    Zhang, Yifei
    Li, Jianzhong
    2017 4TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, MECHANICS AND STRUCTURAL ENGINEERING (4TH AMMSE 2017), 2017, 269
  • [6] Effect of build atmosphere on the mechanical properties of AlSi10Mg produced by selective laser melting
    Rakesh, Srinivasa Ch
    Priyanka, Nadig
    Jayaganthan, R.
    Vasa, Nilesh J.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 17231 - 17238
  • [7] Effect of Heat Treatment on Microstructure and Properties of Selective Laser Melting AlSi10Mg Alloy
    Jian, Haigen
    Yang, Man
    Fang, Wu
    Pai, Junjun
    Yang, Xiaomei
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, : 3267 - 3280
  • [8] Effect of Electrospark Alloying on the Geometry and Tribological Properties of the Surface of the AlSi10Mg Alloy Produced by Selective Laser Melting
    Mal'tsev, I. E.
    Basov, A. A.
    Lesnevskii, L. N.
    Denisov, L. V.
    Nikolaev, I. A.
    Eremkina, M. S.
    RUSSIAN METALLURGY, 2022, 2022 (12): : 1588 - 1595
  • [9] Effect of Electrospark Alloying on the Geometry and Tribological Properties of the Surface of the AlSi10Mg Alloy Produced by Selective Laser Melting
    I. E. Mal’tsev
    A. A. Basov
    L. N. Lesnevskii
    L. V. Denisov
    I. A. Nikolaev
    M. S. Eremkina
    Russian Metallurgy (Metally), 2022, 2022 : 1588 - 1595
  • [10] Laser Weldability of AlSi10Mg Alloy Produced by Selective Laser Melting: Microstructure and Mechanical Behavior
    Biffi, Carlo Alberto
    Fiocchi, Jacopo
    Tuissi, Ausonio
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) : 6714 - 6719
12345