Active Control of Quasi-Zero-Stiffness Vibration Isolator with Variable Load

Quasi-zero-stiffness (QZS) isolator has great application potential in the field of low-frequency vibration isolation due to its high-static and low-dynamic (HSLD) nonlinear stiffness characteristic, but it is precisely this characteristic that makes it very sensitive to load changes. Once the load changes, causing it to deviate from the equilibrium position, it no longer qualifies zero-stiffness characteristic, and the vibration isolation capacity will be significantly decrease. To make the QZS isolator possess variable load capacity and be more suitable for engineering practice, an active QZS vibration isolator based on electromagnetic actuator is designed in this paper, which eliminates the influence of load changes through the active force of the electromagnetic actuator. First, the dynamic equation of the isolator is established by Newton-Euler method, and the dynamic characteristic of the isolator under standard load and load variations are analyzed through improved incremental harmonic balance (IHB) method based on discrete Fourier transform (DFT). Next, the improved particle swarm optimization (PSO) algorithm are employed to optimize the Proportion Integration Differentiation (PID) controller parameters. Then, the vibration isolation performance of QZS isolator in controlled and uncontrolled and linear systems in the same control state are compared in frequency domain and time domain, respectively. Finally, the performance of active QZS isolator under load variation is discussed. The results indicate that the isolation performance of the QZS isolator under active control is significantly better than in uncontrolled conditions and the controlled linear system. When the load changes, real-time compensation through the actuator output control force can also enable the QZS isolator to achieve a better vibration isolation performance.