Influence of forming parameters on friction coefficient in single point incremental forming process

被引：0
|
作者：
Yao, Zimeng [1 ,2 ,3 ]
Liang, Xiaoming [1 ,2 ,3 ]
Wu, Shenli [1 ,2 ,3 ]
Liu, Ling [1 ,2 ,3 ]
Bai, Lang [1 ]
Zhang, Jialing [1 ]
机构：
[1] Xian Univ, Sch Mech & Mat Engn, Xian, Peoples R China
[2] Shaanxi Key Lab Surface Engn & Remfg, Xian, Peoples R China
[3] Xian Key Lab Intelligent Addit Mfg Technol, Xian, Peoples R China
来源：
FERROELECTRICS | 2023年 / 609卷 / 01期
关键词：
Single point incremental forming; friction coefficient; mechanical model; forming parameters;
D O I：
10.1080/00150193.2023.2198950
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Friction characteristics have great influence on forming quality and formability during single point incremental forming. At the same time, the friction coefficient has a significant influence on the finite element model of forming process. In this paper, the friction coefficient of forming process was studied deeply through the combination of theoretical research and experimental research. Firstly, a single point incremental forming mechanical model considering friction was established, and a method to solve the friction coefficient of forming process was obtained. On this basis, the direct relationship between forming parameters and friction coefficient was established by response surface method, and the influence law of forming parameters on friction coefficient was analyzed. The results provided theoretical and technical support for the improvement of friction mechanism and forming quality in single point incremental forming.
引用
收藏
页码：20 / 40
页数：21
相关论文
共 50 条
  • [41] Tool dynamics during single point incremental forming process
    Martinez-Romero, Oscar
    Luisa Garcia-Romeu, Maria
    Olvera-Trejo, Daniel
    Bagudanch, Isabel
    Elias-Zuniga, Alex
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 2286 - 2291
  • [42] Investigation into the process parameter of single point incremental forming (SPIF)
    Oraon, Manish
    Mandal, Soumen
    Sharma, Vinay
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 5218 - 5221
  • [43] Failure in single point incremental forming
    Madeira, T.
    Silva, C. M. A.
    Silva, M. B.
    Martins, P. A. F.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (9-12): : 1471 - 1479
  • [44] Single point incremental forming of PVC
    Franzen, V.
    Kwiatkowski, L.
    Martins, P. A. F.
    Tekkaya, A. E.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) : 462 - 469
  • [45] Single point incremental forming of polymers
    Martins, P. A. F.
    Kwiatkowski, L.
    Franzen, V.
    Tekkaya, A. E.
    Kleiner, M.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) : 229 - 232
  • [46] Forces in single point incremental forming
    Jeswiet, J
    Szekeres, A
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 399 - 404
  • [47] Temperature influence on Single Point Incremental Forming of PVC parts
    Medina-Sanchez, G.
    Torres-Jimenez, E.
    Lopez-Garcia, R.
    Dorado-Vicente, R.
    Cazalla-Moral, R.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 335 - 342
  • [48] Failure in single point incremental forming
    T. Madeira
    C. M. A. Silva
    M. B. Silva
    P. A. F. Martins
    The International Journal of Advanced Manufacturing Technology, 2015, 80 : 1471 - 1479
  • [49] Prediction Of The Coefficient Of Friction In The Single Point Incremental Forming Of Truncated Cones From A Grade 2 Titanium Sheet
    Trzepieciński T.
    Szpunar M.
    Tribologia, 2023, 40 (01): : 4 - 17
  • [50] TWIST IN SINGLE POINT INCREMENTAL FORMING
    Asghar, Javed
    Shibin, E.
    Bhattacharya, A.
    Reddy, N. V.
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2012, 2012, : 243 - 247
12345