In-situ dynamic monitoring of phase transformation in steels using a multi-frequency electromagnetic sensor

被引：3
|
作者：
Zhou, L. [1 ]
Jacobs, W. [2 ]
Wu, F. [1 ]
Jolfaei, M. [1 ]
Davis, C. L. [1 ]
机构：
[1] Univ Warwick, WMG, Coventry CV4 7AL, England
[2] Primetals Technol Ltd, Christchurch BH23 6EW, England
来源：
NDT & E INTERNATIONAL | 2023年 / 139卷
基金：
英国工程与自然科学研究理事会;
关键词：
Dynamic transformation measurement; Steel microstructure; EM sensors; Relative magnetic permeability; FE modelling; PEARLITIC STEELS; STAINLESS-STEEL; MICROSTRUCTURE; PERMEABILITY; FRACTION; BEHAVIOR;
D O I：
10.1016/j.ndteint.2023.102918
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An industrial-scale electromagnetic (EM) sensor is employed to non-destructively and dynamically monitor the microstructural phase transformation for mild steel samples with different thicknesses (3 mm, 6 mm, and 10 mm), high carbon steel (0.76 wt% C) and 2.25Cr-1Mo steel plates. The continuous cooling process of these samples in ambient air (cooling rate of 0.99-7.53 degrees C/s) on a run-out table is examined. To determine the phase fractions based on the EM sensor signal and measured temperature, a finite element (FE) model for the EM sensor is utilised. The obtained phase fractions are further validated by conducting dilatometry measurements inde-pendently, confirming the accuracy of the transformation behaviour and phase fraction determination derived from the EM sensor readings.
引用
收藏
页数：8
相关论文
共 50 条
  • [21] Electromagnetic sensors for monitoring phase transformation in steels - Experimental results and modeling simulations
    Papaelias, MP
    Davis, CL
    Strangwood, M
    Peyton, AJ
    MODELING THE PERFORMANCE OF ENGINEERING STRUCTURAL MATERIALS III, 2002, : 311 - 320
  • [22] Modeling and experimental study of a multi-frequency electromagnetic sensor system for rail decarburisation measurement
    Zhu, W.
    Yin, W.
    Dewey, S.
    Hunt, P.
    Davis, C. L.
    Peyton, A. J.
    NDT & E INTERNATIONAL, 2017, 86 : 1 - 6
  • [23] In-situ Damage Monitoring of Composites under Dynamic Impact using Nylon/Ag Fiber Sensor
    Qureshi, Y.
    Tarfaoui, M.
    Benyahia, H.
    Lafdi, K. K.
    Lafdi, K.
    NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, CIVIL INFRASTRUCTURE, AND TRANSPORTATION VIX, 2020, 11380
  • [24] Multi-frequency electromagnetic scattering from inhomogeneous bodies using shifted frequency equivalence
    Koksal, A
    IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM - 1996 DIGEST, VOLS 1-3, 1996, : 2114 - 2117
  • [25] Monitoring of Polymorph Transformation using In-situ Measurement of Ultrasonic Velocity
    Kim, Hye-Jin
    Jung, Jae-Uk
    Kim, Doo-Yong
    Phuong, Ng T. Nhat
    Kim, Kwang-Joo
    BIWIC 2007, 2007, : 89 - 94
  • [26] In-situ aberration monitoring using phase wheel targets
    Zavyalova, L
    Smith, B
    OPTICAL MICROLITHOGRAPHY XVII, PTS 1-3, 2004, 5377 : 172 - 184
  • [27] A Research on Multi-frequency Band Time-scale Frame Transformation for Electromagnetic Transients Simulation
    Yao S.
    Liu C.
    Wang Y.
    Han M.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2019, 39 (24): : 7199 - 7208
  • [28] Non-contact monitoring of kiwifruit ripening using a high-sensitivity multi-frequency inductive sensor
    Boukharouba, Hana
    Pasquier, Alexiane
    Le Diraison, Yohan
    Serfaty, Stephane
    Joubert, Pierre-Yves
    2023 IEEE SENSORS, 2023,
  • [29] Scintillation Monitoring and Feature Analysis Using Multi-Frequency GNSS Receivers
    Morton, Y. Jade
    Breitsch, Brian
    Rino, Charles
    Xu, Dongyang
    Yang, Rong
    2018 2ND URSI ATLANTIC RADIO SCIENCE MEETING (AT-RASC), 2018,
  • [30] Multi-frequency electromagnetic scattering from inhomogeneous rectangular waveguides using shifted frequency equivalence
    Koksal, A
    IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM 1997, VOLS 1-4, 1997, : 812 - 815
12345