THE INFLUENCE OF ENVIRONMENTAL CONDITIONS ON THE TRIBOLOGICAL PROPERTIES OF THE Ti13Nb13Zr ALLOY

被引:0
|
作者
Piotrowska, K. [1 ]
Madej, M. [1 ]
Kowalczyk, J. [1 ]
Radon-kobus, K. [1 ]
机构
[1] Kielce Univ Technol, Kielce, Poland
来源
METALURGIJA | 2024年 / 63卷 / 01期
关键词
Ti13Nb13Zr; lubrication; friction; wear; surface texture; BEHAVIOR; CORROSION;
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The paper presents the results of tribological tests of the Ti13Nb13Zr titanium alloy carried out in the conditions of lubrication with liquids simulating body fluids. Artificial saliva solutions were used for the tests. Two pH values were used - 7,0 characteristic of a healthy organism and 4,9 typical for the presence of inflammation. The counter sample in the tested friction nodes were Al O balls with a diameter of 6 mm loaded with a normal force of 1 N. The 2 3 tests obtained showed a strong influence of environmental conditions on the tribological properties of the Ti13Nb13Zr titanium alloy. This applies to both the value of the coefficient of friction and linear wear. In the case of tests carried out under lubrication conditions with an artificial saliva solution at pH 7,0 they were 0,47 and 31,1 & mu; m, respectively; in the case of a fluid at pH 4,9 they were 25 % and 45 % higher (0,62 and 65,6 & mu;m).
引用
收藏
页码:53 / 56
页数:4
相关论文
共 50 条
  • [21] Exploring the composition and corrosion resistance in hybrid-modified Ti13Nb13Zr alloy
    Sypniewska, Joanna
    Szkodo, Marek
    Majkowska-Marzec, Beata
    Mielewczyk-Gryn, Aleksandra Dorota
    MRS COMMUNICATIONS, 2024, 14 (06) : 1439 - 1445
  • [22] The influence of chitosan's molecular weight, concentration, and dissolution method on the properties of electrophoretically deposited coatings on the Ti13Nb13Zr alloy surface
    Pawlowski, Lukasz
    Mania, Szymon
    Banach-Kopec, Adrianna
    Staszczyk, Karol
    Mirowska, Aleksandra
    Mielewczyk-Gryn, Aleksandra
    Tylingo, Robert
    MATERIALS CHEMISTRY AND PHYSICS, 2025, 331
  • [23] Depth profiling analysis of the nitriding layer formed by gas nitriding of Ti13Nb13Zr alloy
    Sun, Xiaolei
    Song, Hanke
    Luo, Yong
    MATERIALS RESEARCH EXPRESS, 2023, 10 (11)
  • [24] INFLUENCE OF TIO2 COATING DEPOSITED WITH THE ATOMIC LAYER DEPOSITION ALD TECHNIQUE ON THE PROPERTIES OF Ti13Nb13Zr TITANIUM ALLOY
    Piotrowska, K.
    Madej, M.
    METALURGIJA, 2022, 61 (3-4): : 665 - 668
  • [25] Surface anodization of the biphasic Ti13Nb13Zr biocompatible alloy: Influence of phases on the formation of TiO2 nanostructures
    Godoy Perez, Diego Alfonso
    Jorge Junior, Alberto Moreira
    Asato Jean, Gabriel Hitoshi
    Lepretre, Jean-Claude
    Roche, Virginie
    Bolfarini, Claudemiro
    Botta, Walter Jose
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 796 : 93 - 102
  • [26] Structural, Mechanical and Tribological Properties of Hydroxiapatite Reinforced Ti13Nb13Zr/HA Composite Produced by Friction Stir Process (FSP)
    Acimert, Ozlem Baran
    Okur, Beyza Begum
    Dayauc, Aysenur Keles
    Kucukomeroglu, Tevfik
    Kanca, Yusuf
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2024, 55 (04): : 2739 - 2749
  • [27] 医用钛合金Ti13Nb13Zr低速冲击性能
    李岳
    何慧娟
    李志刚
    科学技术与工程, 2019, 19 (27) : 31 - 35
  • [28] Preparation and biological activity study of Ti13Nb13Zr surface nanotubes
    Fan, Xingping
    Fan, Wei
    BIOSURFACE AND BIOTRIBOLOGY, 2024, 10 (04) : 159 - 166
  • [29] Influence of polyetheretherketone coatings on the Ti-13Nb-13Zr titanium alloy's bio-tribological properties and corrosion resistance
    Sak, Anita
    Moskalewicz, Tomasz
    Zimowski, Slawomir
    Cieniek, Lukasz
    Dubiel, Beata
    Radziszewska, Agnieszka
    Kot, Marcin
    Lukaszczyk, Alicja
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2016, 63 : 52 - 61
  • [30] A Facile Strategy for the Growth of an Anodic Oxidation Film of the Ti13Nb13Zr Alloy Driven by Residual Stress
    Wang, Wei
    Lin, Yan
    Wang, Yuan
    Yu, Xiaohua
    Rong, Ju
    Zhang, Yannan
    Feng, Jing
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2019, 14 (03): : 2224 - 2239