Effect of tungsten contents on the jet penetration performance of shaped charge liner based copper-tungsten composites

被引:1
|
作者
Tuan, Nguyen Minh [1 ,2 ,3 ]
Toan, Nguyen Van [1 ]
Long, Vu Thang [3 ]
Duong, Luong Van [1 ]
Trinh, Pham Van [1 ,2 ]
Trung, Tran Bao [1 ,2 ]
Phuong, Doan Dinh [1 ,2 ]
机构
[1] Vietnam Acad Sci & Technol, Inst Mat Sci, Hanoi, Vietnam
[2] Grad Univ Sci & Technol, Vietnam Acad Sci & Technol, Hanoi, Vietnam
[3] Inst Technol, Hanoi, Vietnam
关键词
W-Cu composite; penetration depth; shaped charge liner; spark plasma sintering; density; hardness; MICROSTRUCTURE; STEEL; MECHANISM; ALLOYS; NI;
D O I
10.3389/fmats.2024.1308290
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Herein, we investigated the effect of W content on the jet penetration performance of W-Cu shaped charge liners by using both simulation and experimental methods. The W-Cu composite liners were prepared directly by using spark plasma sintering (SPS) technique. Microstructural observations showed that W particles were uniformly dispersed within the Cu matrix. The relative density of W-Cu composites decreased slightly from 99.2% to 98.8% with an increase in the W content. The hardness of the W-Cu composite liner increased as increasing W content and reached the highest value of 209.2 HV for the composite reinforced by 60 wt.% W. Besides, the penetration depth increased and reached the maximum value of 80 mm for the composite liner containing 50 wt.% W which is improved by about 11% compared to pure Cu liner. According to simulation and experiment results, the penetration depth of the W-Cu composite liners exhibits a nearly identical trend. W-Cu composite liner containing 50 wt.% W remains the best performance compared to other composites. However, the experimental results are lower compared to the simulation results. This could be because the simulation procedure did not completely account for the actual test conditions.
引用
收藏
页数:13
相关论文
共 50 条
  • [31] Effect of Annealing on the Microstructure and Mechanical Properties of Nickel-Tungsten Alloy Liner for Shaped Charge
    Liu Derong
    Cheng Shengwei
    Luo Yang
    Tian Wenhuai
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (03) : 629 - 633
  • [32] Microstructure effect on reignition and welding properties of copper-tungsten electric contact
    Leung, C
    Streicher, E
    Fitzgerald, D
    Ilich, D
    PROCEEDINGS OF THE FORTY-NINTH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS, 2003, : 132 - 138
  • [33] Machine learning optimization strategy of shaped charge liner structure based on jet penetration efficiency
    Zhao, Ziqi
    Li, Tong
    Sheng, Donglin
    Chen, Jian
    Yan, Amin
    Chen, Yan
    Wang, Haiying
    Chen, Xiaowei
    Dai, Lanhong
    DEFENCE TECHNOLOGY, 2024, 39 : 23 - 41
  • [34] Machine learning optimization strategy of shaped charge liner structure based on jet penetration efficiency
    Ziqi Zhao
    Tong Li
    Donglin Sheng
    Jian Chen
    Amin Yan
    Yan Chen
    Haiying Wang
    Xiaowei Chen
    Lanhong Dai
    Defence Technology, 2024, 39 (09) : 23 - 41
  • [35] The inhibitor effect on the shaped charge jet penetration
    Joo, Jaehyun
    Choi, Joonhong
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020, 34 (11) : 4685 - 4694
  • [36] The inhibitor effect on the shaped charge jet penetration
    Jaehyun Joo
    Joonhong Choi
    Journal of Mechanical Science and Technology, 2020, 34 : 4685 - 4694
  • [37] Analysis of penetration performance of shaped charge with arc liner to runway
    Wang, Z.-C. (wangskyshark@bit.edu.cn), 1600, China Ordnance Industry Corporation (33):
  • [38] The Effect of Cylindrical Liner Material on the Jet Formation and Penetration Capability of Cylinder-Cone-Shaped Charge
    Wang, Yifan
    Wang, Zhijun
    Xu, Yongjie
    Jin, Zhen
    MATERIALS, 2022, 15 (10)
  • [39] Effect of size and shape of tungsten particles on penetration performance in tungsten heavy alloys
    Kim, Dong-Kuk
    Lee, Sunghak
    Song, Heung-Sub
    Metals and Materials International, 1999, 5 (02): : 211 - 223
  • [40] Effect of size and shape of tungsten particles on penetration performance in tungsten heavy alloys
    Dong-Kuk Kim
    Sunghak Lee
    Heung-Sub Song
    Metals and Materials, 1999, 5 : 211 - 223