Fitting-based Cutting Force Estimation for Machine Tool with Encoder Resolution Analysis

被引：0
|
作者：
Hayashi, Takumi [1 ]
Fujimoto, Hiroshi [1 ]
Isaoka, Yoshihiro [2 ]
Terada, Yuki [2 ]
机构：
[1] Univ Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 2778561, Japan
[2] DMG MORI CO LTD, 1 Sanjohonmachi, Nara 6308122, Japan
来源：
2023 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS, ICM | 2023年
关键词：
Machine tool; cutting force estimation; twoinertia system; disturbance observer; ROBUST;
D O I：
10.1109/ICM54990.2023.10101950
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The cutting process with machine tools plays an important role in the industry. Cutting force is a crucial factor in monitoring the tool status, and thus its sensorless estimation is gaining attention. The aim of this study is to develop a practical cutting force estimation. In this study, the encoder resolution is focused on, and the effect of encoder resolution on cutting force estimation is analyzed. Then, a cutting force estimation method robust to the quantization of the encoder signal is proposed. The experiments with an actual machine tool are performed, and the effectiveness of the proposed approach is demonstrated.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Cutting Force Analysis of On-Machine Fabricated PCD Tool during Glass Micro-Grinding
    Perveen, Asma
    Jahan, M. P.
    Wong, Y. S.
    Rahman, M.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1085 - 1090
  • [32] L-Shape Fitting-Based Vehicle Pose Estimation and Tracking Using 3D-LiDAR
    Zhao, Chengfeng
    Fu, Chen
    Dolan, John
    Wang, Jun
    IEEE TRANSACTIONS ON INTELLIGENT VEHICLES, 2021, 6 (04): : 787 - 798
  • [33] Tool Wear Monitoring: an Automated System Based on Multiple Cutting Force Parameters and Machine Vision Technique
    Liang, Yu-Teng
    Chiou, Yih-Chih
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION, 2009, 626-627 : 5 - 10
  • [34] Cutting force models for Fe–Al-based coating processed by a compound NC machine tool
    Yewang Sun
    Zhijing Zhang
    Jiaying Zhang
    Xin Jin
    Binshi Xu
    Gang Zhao
    The International Journal of Advanced Manufacturing Technology, 2015, 79 : 693 - 704
  • [35] Cutting force models for Fe-Al-based coating processed by a compound NC machine tool
    Sun, Yewang
    Zhang, Zhijing
    Zhang, Jiaying
    Jin, Xin
    Xu, Binshi
    Zhao, Gang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (1-4): : 693 - 704
  • [36] A new method for prediction of cutting force considering the influence of machine tool system and tool wear
    Chen, Xi
    Zhang, Zhao
    Wang, Qi
    Zhang, Dinghua
    Luo, Ming
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (3-4): : 1843 - 1852
  • [37] A new method for prediction of cutting force considering the influence of machine tool system and tool wear
    Xi Chen
    Zhao Zhang
    Qi Wang
    Dinghua Zhang
    Ming Luo
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 1843 - 1852
  • [38] Parameter estimation of positive lightning impulse using curve fitting-based optimization techniques and least squares algorithm
    Seker, Mustafa
    ELECTRIC POWER SYSTEMS RESEARCH, 2022, 205
  • [39] The Analysis of Tool Holder Vibrations During the Cutting Process on Machine Tool
    Karabegovic, I.
    Husak, E.
    Novkinic, B.
    MECHANIKA 2012: PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE, 2012, : 123 - 129
  • [40] Optimization of tool geometry and cutting parameters based on a predictive model of cutting force
    Zhao Jun Shandong University, Jinan 250061, China
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2008, 19 (04): : 428 - 431
12345