Numerical determination of fluid-to-particle mass and heat transfer coefficients in packed bed reactors

被引：5

作者：

Weng, Junqi ^{[1
]}

Zhang, Qunfeng ^{[1
]}

Yu, Jiahao ^{[1
]}

Yu, Qihuan ^{[1
]}

Ye, Guanghua ^{[1
]}

Zhou, Xinggui ^{[1
]}

Yuan, Weikang ^{[1
]}

机构：

[1] East China Univ Sci & Technol, Sch Chem Engn, State Key Lab Chem Engn, Shanghai 200237, Peoples R China

来源：

AICHE JOURNAL | 2023年 / 69卷 / 05期

基金：

中国国家自然科学基金; 上海市自然科学基金;

关键词：

axial dispersion; heat transfer coefficient; mass transfer coefficient; packed bed reactor; particle-resolved CFD; AXIAL-DISPERSION; LOW TUBE; EXPERIMENTAL VALIDATION; PRESSURE-DROP; FLOW; GAS; DYNAMICS; SIMULATION; RATIO;

D O I：

10.1002/aic.17980

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A method based on particle-resolved CFD is built and validated, to calculate the fluid-to-particle mass and heat transfer coefficients in packed beds of spheres with different tube-to-particle diameter ratios (N) and of various particle shapes with N = 5.23. This method is characterized by considering axial dispersion. The mass and heat transfer coefficients increase by 5%-57% and 9%-63% after considering axial dispersion, indicating axial dispersion should be included in the method. The mass and heat transfer coefficients are reduced as N decreases. The catalyst particles without inner holes show higher mass and heat transfer coefficients than the ones with inner holes, because of unfavorable fluid flow in inner holes. The bed of trilobes has the highest mass and heat transfer coefficients, being 85% and 95% higher than the one of spheres. This work provides a versatile method and some useful guidance for the design of packed bed reactors.

引用

页数：14

共 50 条

[21] FLUID-TO-PARTICLE HEAT-TRANSFER IN FLUIDIZED-BEDS
BHATTACHARYYA, D
PEI, DCT
INDUSTRIAL & ENGINEERING CHEMISTRY FUNDAMENTALS, 1974, 13 (03): : 199 - 203
[22] Biological verification of fluid-to-particle interfacial heat transfer coefficients in a pilot scale holding tube simulator
Biotechnol Prog, 4 (527):
[23] Biological verification of fluid-to-particle interfacial heat transfer coefficients in a pilot scale holding tube simulator
Ramaswamy, HS
Awuah, GB
Simpson, BK
BIOTECHNOLOGY PROGRESS, 1996, 12 (04) : 527 - 532
[24] FLUID-TO-PARTICLE HEAT-TRANSFER COEFFICIENTS IN CANS DURING END-OVER-END PROCESSING
SABLANI, SS
RAMASWAMY, HS
FOOD SCIENCE AND TECHNOLOGY-LEBENSMITTEL-WISSENSCHAFT & TECHNOLOGIE, 1995, 28 (01): : 56 - 61
[25] FLUID-TO-PARTICLE HEAT-TRANSFER IN FLUIDIZED-BEDS - REPLY
BHATTACHARYYA, D
PEI, DCT
INDUSTRIAL & ENGINEERING CHEMISTRY FUNDAMENTALS, 1975, 14 (03): : 282 - 282
[26] Numerical Investigations of Packed Bed Reactors with Irregular Particle Arrangements
Atmakidis, Theodoros
Kenig, Eugeny Y.
24TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, PTS A AND B, 2014, 33 : 217 - 222
[27] Studying fluid-to-particle heat transfer coefficients in vessel cooking processes using potatoes as measuring devices
Feyissa, Aberham Hailu
Christensen, Martin Gram
Pedersen, Soren Juhl
Hickman, Minka
Adler-Nissen, Jens
JOURNAL OF FOOD ENGINEERING, 2015, 163 : 71 - 78
[28] Correlations of Mass Transfer Coefficients in a Rotating Packed Bed
Chen, Yu-Shao
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2011, 50 (03) : 1778 - 1785
[29] The effect of translational and rotational relative velocity components on fluid-to-particle heat transfer coefficients in continuous tube flow
Baptista, PN
Oliveira, FAR
Oliveira, JC
Sastry, SK
FOOD RESEARCH INTERNATIONAL, 1997, 30 (01) : 21 - 27
[30] PARTICLE-TO-FLUID HEAT AND MASS TRANSFER IN PACKED BEDS OF FINE PARTICLES
KUNII, D
SUZUKI, M
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1967, 10 (07) : 845 - &

← 1 2 3 4 5 →