Influence of graphene coating in electrical discharge machining with an aluminum electrode

被引：3

作者：

Van, Dong Pham ^{[1
]}

Shirguppikar, Shailesh ^{[2
]}

Huu, Phan Nguyen ^{[1
]}

Thangaraj, Muthuramalingam ^{[3
]}

Phuong, Thanh Le Thi ^{[1
]}

Tron, Ly Nguyen ^{[1
]}

Ganachari, Vaibhav ^{[2
]}

机构：

[1] Hanoi Univ Ind, Fac Mech Engn, 298 Cau Dien St, Hanoi, Vietnam

[2] Shivaji Univ, Rajarambapu Inst Technol, Dept Mechatron Engn, Sakharale 414415, MS, India

[3] SRM Inst Sci & Technol, Dept Mechatron Engn, Kattankulathur Campus, Kattankulathur 603203, Tamilnadu, India

来源：

JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS | 2023年 / 32卷 / 01期

关键词：

EDM; coated electrode; graphene; aluminum; MRR; TWR; OPTIMIZATION; PERFORMANCE;

D O I：

10.1515/jmbm-2022-0287

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Since the cost of electrodes in electrical discharge machining (EDM) is usually too high, it leads to a significant increase in the production cost. Hence, it is important to conduct research aimed at reducing the manufacturing cost of electrodes. Currently, coated electrodes are a new process solution in EDM. It can improve the economic and technical efficiency of this technology. In this article, the efficiency of the graphene-coated aluminum (Al) electrode in the EDM for Ti-6Al-4V was analyzed and evaluated. Material removal rate and tool wear rate were used as quality indicators in this work. The research results have shown a significant improvement in quality characteristics in EDM with coated electrodes compared to EDM with uncoated electrodes. The surface quality of the specimen with coated electrodes in EDM was also improved.

引用

页数：10

共 50 条

[31] Transient response of wire electrode in wire electrical discharge machining
Yamada, H
Mohri, N
Furutani, K
Magara, T
PROCEEDINGS OF THE TWELFTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1997, : 307 - 310
[32] Formation of electrical discharge machining electrode via laser cladding
Tang, Y
Fuh, JYH
Lu, L
Wong, YS
Loh, HT
Gupta, M
RAPID PROTOTYPING JOURNAL, 2002, 8 (05) : 315 - 319
[33] Investigation on the Impact of Electrical Discharge Machining on the Tribological Properties of Aluminum
Kumar, Deepak
Lijesh, K. P.
Kuriachen, Basil P. K.
ADVANCES IN BASIC SCIENCES (ICABS 2019), 2019, 2142
[34] ELECTRICAL DISCHARGE MACHINING PERFORMANCE OF ALUMINUM HYBRID COMPOSITE MATERIAL
Iosub, Adrian
Negoescu, Florin
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE MODERN TECHNOLOGIES, QUALITY AND INNOVATION: MODTECH 2009 - NEW FACE OF TMCR, 2009, : 347 - 350
[35] Influence of external hydrostatic pressure on machining characteristics of electrical discharge machining
Koyano, Tomohiro
Hosokawa, Akira
Suzuki, Shodai
Ueda, Takashi
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (01) : 229 - 232
[36] A STUDY OF MACHINING PARAMETERS DURING ELECTRICAL DISCHARGE MACHINING OF STEEL BY A ROTARY COPPER ELECTRODE
Satsangi, P. S.
Chattopadhyay, K. D.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 756 - +
[37] Investigation of Machining Characteristics in Electrical Discharge Machining Using a Slotted Electrode with Internal Flushing
Gao, Minghao
Liu, Ming
Han, Jianqing
Zhang, Qinhe
MICROMACHINES, 2023, 14 (11)
[38] Influence of additives in dielectric fluids for electrical discharge machining
Rehbein, W.
Schulze, H. -P.
Storr, M.
Wollenberg, G.
PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 99 - 103
[39] Influence of Additives in Dielectric Fluids for Electrical Discharge Machining
Rehbein, W.
Schulze, H. -P.
Storr, M.
PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 53 - 57
[40] Influence of micro-electrical discharge machining parameters on the surface morphology of the nickel-coated electrode
Siva, M.
Arunkumar, N.
Subramanian, M.
Elakkiyadasan, R.
MATERIALS AND MANUFACTURING PROCESSES, 2023, 38 (01) : 89 - 104

← 1 2 3 4 5 →