Effect of copper and silver as a middle layer on the structural, electrical, photocatalytic, and optical properties of ZnS/metal/ZnS films for optoelectronics applications

In this work, we utilized the thermal vacuum evaporation technique to fabricate ZnS single-layer thin films, ZnS/Cu/ZnS (ZCZ), and ZnS/Ag/ZnS (ZAZ) multilayer thin films. The influence of the middle layer of metals like copper and silver on the physical properties of ZnS/metal/ZnS multilayers is investigated. The results of the X-ray investigation demonstrate that the samples are polycrystalline, with a cubic ZnS structure and texture (111) at 2 = 29.1 & DEG;. The optical investigation using Tauc's approach yields energy gap values of 3.76 eV, 3.68 eV, and 3.6 eV for ZnS, ZCZ, and ZAZ films, respectively. CO2 gas sensing efficiency of ZnS, ZCZ, and ZAZ films were found to be at different operating temperatures. The optimal temperatures for ZnS, ZCZ, and ZAZ thin films were determined to be 483 K, 693 K, and 693 K, respectively. Under ultraviolet (UV) irradiation, the photocatalytic activity of ZnS, ZCZ, and ZAZ films for the degradation of methylene blue were studied. The results suggest that the metal intermediate layer is significant in improving the photocatalytic capabilities of ZnS films. When compared to ZnS single layer film (degradation efficiency of 15% after 180 min of UV irradiation), ZAZ multilayer film demonstrates the highest photocatalytic activity (degradation efficiency of 50% after 180 min of UV irradiation). The mechanism of the metal middle layer's improved UV photoactivity is briefly discussed.