A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites

被引：43

作者：

Geier, Norbert ^{[1
,2
]}

Patra, Karali ^{[3
]}

Anand, Ravi Shankar ^{[4
]}

Ashworth, Sam ^{[5
]}

Balazs, Barnabas Zoltan ^{[1
]}

Lukacs, Tamas ^{[1
]}

Magyar, Gergely ^{[1
]}

Tamas-Benyei, Peter ^{[6
,7
]}

Xu, Jinyang ^{[8
]}

Davim, J. Paulo ^{[9
]}

机构：

[1] Budapest Univ Technol & Econ, Fac Mech Engn, Dept Mfg Sci & Engn, H-1111 Budapest, Hungary

[2] Obuda Univ, Donat Banki Fac Mech & Safety Engn, H-1081 Budapest, Hungary

[3] Indian Inst Technol Patna, Dept Mech Engn, Patna 801103, Bihar, India

[4] Birla Inst Technol, Dept Mech Engn, Patna Campus, Patna 800014, Bihar, India

[5] Univ Salford, North England Robot Innovat Ctr, Salford, Greater Manches, England

[6] Budapest Univ Technol & Econ, Fac Mech Engn, Dept Polymer Engn, Muegyet Rkp 3, H-1111 Budapest, Hungary

[7] ELKH BME Res Grp Composite Sci & Technol, Muegyet Rkp 3, H-1111 Budapest, Hungary

[8] Shanghai Jiao Tong Univ, Sch Mech Engn, State Key Lab Mech Syst & Vibrat, Shanghai 200240, Peoples R China

[9] Univ Aveiro, Ctr Mech Engn & Automat TEMA, Dept Mech Engn, Campus Santiago, P-3810193 Aveiro, Portugal

来源：

COMPOSITES PART B-ENGINEERING | 2023年 / 254卷

关键词：

A; polymer-matrix composites (PMCs); B; Microstructures; E; Machining; Micro-drilling; SUPPORT PLATES INFLUENCES; FINITE-ELEMENT-ANALYSIS; TOOL WEAR; HIGH-SPEED; C/SIC COMPOSITES; PROCESS PARAMETERS; CUTTING PROCESS; CHIP FORMATION; HOLE QUALITY; THRUST FORCE;

D O I：

10.1016/j.compositesb.2023.110589

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Recent trends in miniaturisation and high-strength fibrous composites encourage the use of mechanical microdrilling technology of fibre-reinforced polymer composites (FRPs). Although severe expertise has been gained through the past few decades on the machinability of FRPs, this information cannot be directly adapted to the micro-drilling mainly due to the size effect. Therefore, the main aim of the present study is to comprehensively review challenges, recent experience, and future aspects of mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP, CFRP) composites. The chip removal mechanisms of micro-drilling of FRPs are reviewed and compared to conventional-sized technologies. Furthermore, the micro-drilling-induced geometrical defects (delamination, burrs, fibre pull-outs etc.) and the cutting energetics are also discussed. Moreover, the future aspects and research directions are highlighted in this growing research area.

引用

页数：21

共 50 条

[41] Investigation and optimization of machining parameters in drilling of carbon fiber reinforced polymer (CFRP) composites
Shunmugesh, K.
Kavan, Panneerselvam
PIGMENT & RESIN TECHNOLOGY, 2017, 46 (01) : 21 - 30
[42] A review of microwave testing of glass fibre-reinforced polymer composites
Li, Zhen
Haigh, Arthur
Soutis, Constantinos
Gibson, Andrew
Wang, Ping
NONDESTRUCTIVE TESTING AND EVALUATION, 2019, 34 (04) : 429 - 458
[43] Finite element modelling of shear critical glass fibre-reinforced polymer (GFRP) reinforced concrete beams
Alam, Md Shah
Hussein, Amgad
INTERNATIONAL JOURNAL OF MODELLING AND SIMULATION, 2021, 41 (01): : 11 - 23
[44] Direct monitoring of hole damage in carbon fibre-reinforced polymer (CFRP) composites
Geier, N.
Poka, Gy
Szalay, T.
XXIII INTERNATIONAL CONFERENCE ON MANUFACTURING (MANUFACTURING 2018), 2018, 448
[45] A review of the effect of loading rate on the mechanical properties of unidirectional carbon fibre reinforced polymer composites
Thomson, D.
Ploeckl, M.
Hoffmann, J.
Lissner, M.
Pohl, C.
Quino, G.
Ramakrishnan, K.
Toenjes, M.
Cui, H.
Petrinic, N.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2025, 193
[46] Investigation of laser micro-drilling machinability and performance optimization of polymer nanocomposites reinforced with different carbon allotropes
Mishra, Lipsamayee
Mahapatra, Trupti Ranjan
Mishra, Debadutta
Parimanik, Soumya Ranjan
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (03) : 1354 - 1371
[47] Analysis on Drilling of Glass Fiber-Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis
Palanikumar, K.
Latha, B.
Senthilkumar, V. S.
Davim, J. Paulo
MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (03) : 297 - 305
[48] Mechanical Characteristics of Sugarcane Bagasse Fibre Reinforced Polymer Composites: A Review
Zafeer, Mohd. Khalid
Prabhu, Roopa
Rao, Sithara
Mahesha, G. T.
Bhat, K. Subrahmanya
COGENT ENGINEERING, 2023, 10 (01):
[49] A review on dynamic mechanical properties of natural fibre reinforced polymer composites
Saba, N.
Jawaid, M.
Alothman, Othman Y.
Paridah, M. T.
CONSTRUCTION AND BUILDING MATERIALS, 2016, 106 : 149 - 159
[50] Mechanical properties of sisal fibre-reinforced polymer composites: a review
Ibrahim, Idowu David
Jamiru, Tamba
Sadiku, Emmanuel R.
Kupolati, Williams Kehinde
Agwuncha, Stephen C.
Ekundayo, Gbenga
COMPOSITE INTERFACES, 2016, 23 (01) : 15 - 36

← 1 2 3 4 5 →