A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites

被引：43

作者：

Geier, Norbert ^{[1
,2
]}

Patra, Karali ^{[3
]}

Anand, Ravi Shankar ^{[4
]}

Ashworth, Sam ^{[5
]}

Balazs, Barnabas Zoltan ^{[1
]}

Lukacs, Tamas ^{[1
]}

Magyar, Gergely ^{[1
]}

Tamas-Benyei, Peter ^{[6
,7
]}

Xu, Jinyang ^{[8
]}

Davim, J. Paulo ^{[9
]}

机构：

[1] Budapest Univ Technol & Econ, Fac Mech Engn, Dept Mfg Sci & Engn, H-1111 Budapest, Hungary

[2] Obuda Univ, Donat Banki Fac Mech & Safety Engn, H-1081 Budapest, Hungary

[3] Indian Inst Technol Patna, Dept Mech Engn, Patna 801103, Bihar, India

[4] Birla Inst Technol, Dept Mech Engn, Patna Campus, Patna 800014, Bihar, India

[5] Univ Salford, North England Robot Innovat Ctr, Salford, Greater Manches, England

[6] Budapest Univ Technol & Econ, Fac Mech Engn, Dept Polymer Engn, Muegyet Rkp 3, H-1111 Budapest, Hungary

[7] ELKH BME Res Grp Composite Sci & Technol, Muegyet Rkp 3, H-1111 Budapest, Hungary

[8] Shanghai Jiao Tong Univ, Sch Mech Engn, State Key Lab Mech Syst & Vibrat, Shanghai 200240, Peoples R China

[9] Univ Aveiro, Ctr Mech Engn & Automat TEMA, Dept Mech Engn, Campus Santiago, P-3810193 Aveiro, Portugal

来源：

COMPOSITES PART B-ENGINEERING | 2023年 / 254卷

关键词：

A; polymer-matrix composites (PMCs); B; Microstructures; E; Machining; Micro-drilling; SUPPORT PLATES INFLUENCES; FINITE-ELEMENT-ANALYSIS; TOOL WEAR; HIGH-SPEED; C/SIC COMPOSITES; PROCESS PARAMETERS; CUTTING PROCESS; CHIP FORMATION; HOLE QUALITY; THRUST FORCE;

D O I：

10.1016/j.compositesb.2023.110589

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Recent trends in miniaturisation and high-strength fibrous composites encourage the use of mechanical microdrilling technology of fibre-reinforced polymer composites (FRPs). Although severe expertise has been gained through the past few decades on the machinability of FRPs, this information cannot be directly adapted to the micro-drilling mainly due to the size effect. Therefore, the main aim of the present study is to comprehensively review challenges, recent experience, and future aspects of mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP, CFRP) composites. The chip removal mechanisms of micro-drilling of FRPs are reviewed and compared to conventional-sized technologies. Furthermore, the micro-drilling-induced geometrical defects (delamination, burrs, fibre pull-outs etc.) and the cutting energetics are also discussed. Moreover, the future aspects and research directions are highlighted in this growing research area.

引用

页数：21

共 50 条

[1] A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites (vol 254, 110589, 2023)
Geier, Norbert
Patra, Karali
Anand, Ravi Shankar
Ashworth, Sam
Balazs, Barnabas Zoltan
Lukacs, Tamas
Magyar, Gergely
Tamas-Benyei, Peter
Xu, Jinyang
Davim, J. Paulo
COMPOSITES PART B-ENGINEERING, 2023, 262
[2] Drilling of carbon fibre reinforced plastic (CFRP) composites - a review
Rajakumar, I. Paul Theophilus
Hariharan, P.
Vijayaraghavan, L.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2012, 43 (1-4): : 43 - 67
[3] An investigation into the drilling of carbon and glass fibre reinforced polymer composites
Charlton, Peter
Curnick, Paul
Donne, Kelvin
Thomas, Richard
8TH INTERNATIONAL CONFERENCE ON CONDITION MONITORING AND MACHINERY FAILURE PREVENTION TECHNOLOGIES 2011, VOLS 1 AND 2, 2011, : 1333 - 1345
[4] A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fibers (NFRP)
Mohamed Slamani
Jean-François Chatelain
Discover Mechanical Engineering, 2 (1):
[5] Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review
Geier, Norbert
Davim, J. Paulo
Szalay, Tibor
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 125
[6] Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations
Geier, Norbert
Xu, Jinyang
Pereszlai, Csongor
Poor, Daniel Istvan
Davim, J. Paulo
10TH CIRP SPONSORED CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGIES (DET 2020) - DIGITAL TECHNOLOGIES AS ENABLERS OF INDUSTRIAL COMPETITIVENESS AND SUSTAINABILITY, 2021, 54 : 284 - 289
[7] Experimental Investigations Towards Hole Accuracy in Micro-drilling of Carbon Fibre Reinforced Polymer Material
Nasir, Nur Syuhada
Ab Wahab, Norfariza
Bin Sofian, Badri
Izamshah, Raja
Sasahara, Hiroyuki
MANUFACTURING TECHNOLOGY, 2021, 21 (03): : 381 - 386
[8] Sequential Laser-Mechanical Drilling of Thick Carbon Fibre Reinforced Polymer Composites (CFRP) for Industrial Applications
Ahmad Sobri, Sharizal
Heinemann, Robert
Whitehead, David
POLYMERS, 2021, 13 (13)
[9] Development of Laser Drilling Strategy for Thick Carbon Fibre Reinforced Polymer Composites (CFRP)
Ahmad Sobri, Sharizal
Heinemann, Robert
Whitehead, David
POLYMERS, 2020, 12 (11) : 1 - 21
[10] Augmentation of the Delamination Factor in Drilling of Carbon Fibre-Reinforced Polymer Composites (CFRP)
Ahmad Sobri, Sharizal
Whitehead, David
Mohamed, Mazlan
Mohamed, Julie Juliewatty
Mohamad Amini, Mohd Hazim
Hermawan, Andi
Mat Rasat, Mohd Sukhairi
Mohammad Sofi, Azfi Zaidi
Wan Ismail, Wan Omar Ali Saifuddin
Norizan, Mohd Natashah
POLYMERS, 2020, 12 (11) : 1 - 14

← 1 2 3 4 5 →