Modified pseudo-dynamic bearing capacity of reinforced soil foundations

In engineering practice, horizontal layers of reinforcement geosynthetics are widely used to improve the bearing capacity of foundations. However, there are few studies on the seismic bearing capacity of foundations on reinforced soil, and there is a lack of derivation of theoretical formulas in this direction. In this paper, based on the upper bound theorem of limit analysis, the seismic bearing capacity of foundations on reinforced soil is studied for the first time using the modified pseudo-dynamic approach. Seismic forces are calculated using a slicing method that adapts to spatial and temporal variations. Based on three different failure mechanisms, three different formulas and constraints are used. Each formula contains 61 variables, and the bearing capacity value is optimized by MATLAB program. By comparing the calculation results of three failure mechanisms, the exact upper bound solution of seismic bearing capacity for sliding failure is obtained. Considering the temporal as well as spatial characteristics of seismic forces, the effects of the coefficient of seismic acceleration, the internal friction angle, the damping ratio, the normalized frequency, and the reinforcement burial depth on the seismic bearing capacity are analyzed, providing a theoretical basis for the application of reinforced soil foundations in engineering practice.