Joint Precoding for Active Intelligent Transmitting Surface Empowered Outdoor-to-Indoor Communication in mmWave Cellular Networks

Outdoor-to-indoor communications in millimeterwave (mmWave) cellular networks have been one challenging research problem due to the severe attenuation and the high penetration loss caused by propagation characteristics of mmWave signals. We propose a viable solution to implement the outdoor-to-indoor mmWave communication with the aid of an active intelligent transmitting surface (active-ITS), where the active-ITS allows the incoming signal from an outdoor base station (BS) to pass through the surface and be received by indoor users (UEs) after shifting its phase and magnifying its amplitude. Then, the problem of joint precoding of the BS and active-ITS is investigated to maximize the weighted sum-rate (WSR) of the system. An efficient block coordinate descent (BCD) based algorithm is developed to solve it with the suboptimal solutions in nearly closed-forms. In addition, to reduce the size and hardware cost of active-ITSs, we provide a block-amplifying architecture to partially remove the circuit components for power-amplifying, where multiple transmissive-type elements (TEs) in each block share the same power amplifier. Simulations indicate that activeITS has the potential of achieving a given performance with much fewer TEs compared to the passive-ITS under the same total system power consumption, which makes it suitable for application to the space-limited and aesthetic-needed scenario, and the performance degradation caused by the block-amplifying architecture is negligible.