Experimental investigation and performance evaluation of an oval tubular solar still with phase change material

被引:41
|
作者
Aly, Wael I. A. [1 ]
Tolba, Mostafa A. [1 ]
Abdelmagied, Mahmoud [1 ]
机构
[1] Helwan Univ, Fac Technol & Educ, Dept Refrigerat & Air Conditioning Technol, Cairo 11282, Egypt
关键词
Solar desalination; Oval tubular solar still; PCM; Productivity enhancement; Water depth; Exergy efficiency; THERMAL STRATIFICATION; EXERGY ANALYSIS; ABSORBER PLATE; WATER DEPTH; ENERGY; DESALINATION; HEAT; ENHANCEMENT; PCM; NANOFLUIDS;
D O I
10.1016/j.applthermaleng.2022.119628
中图分类号
O414.1 [热力学];
学科分类号
摘要
The problem of freshwater scarcity is a major issue for people all over the world. Solar still is one of the most simplest and affordable ways to produce freshwater using solar energy which is available with no cost and eco-friendly. Recently, tubular solar stills (TSS) have gained popularity as one of the best solutions for acquiring pure water, especially in arid and coastal areas. The main objective of this paper is to enhance the productivity and efficiency of TSS by introducing a new form/shape, the oval tubular solar still (OTSS), integrated with cover cooling and phase change material (PCM). The OTSS is made of a transparent oval tube that is permeable to sunlight from all directions to maximize solar irradiance, and it is integrated with a black basin to improve absorption and water evaporation. It has an appropriate level of flexibility, durability, and low cost. Experiments were conducted out in the climatic conditions of Cairo, Egypt. This paper investigated different basin water depths and different water cover cooling flow rates to obtain their optimal values. Moreover, the effects of using PCM as a thermal management solution were studied in detail. In the case of no cooling, it is observed that the production rate decreases with increasing the water depth in the basin and the maximum production rate reached up to 5.21 L/m2/day at the optimal water depth of 0.5 cm. However, with cooling, the maximum production rate of 6.34 L/m2/day was achieved at the optimum water-cooling flow rate of 2 L/h. Using the PCM the maximum production rate of 6.78 L/m2/day was able to be achieved. The efficiency and productivity of the OTSS were enhanced by 41.26 % and 32.42 %, respectively, when using PCM. Furthermore, the daily thermal exergy efficiency of the OTSS was 3.46 %, 3.85 %, and 4.14 % for the cases no cooling, with cooling and with PCM, respectively. Economically, the cost per liter of desalinated water production was $0.020, $0.017, and $0.017 for the three cases, respectively.
引用
收藏
页数:14
相关论文
共 50 条
  • [21] Experimental Investigation of the Solar Dryer Using Phase-Change Material
    Yadav, C. O.
    Ramana, P., V
    RENEWABLE ENERGY AND CLIMATE CHANGE, 2020, 161 : 185 - 197
  • [22] Numerical and experimental evaluation of the thermal and dynamic performance of a phase change material in an indirect solar dryer
    Chaatouf, Dounia
    Salhi, Mourad
    Bria, Abir
    Raillani, Benyounes
    Amraqui, Samir
    Mezrhab, Ahmed
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2025, 174 : 98 - 110
  • [23] Experimental investigation of a solar still combined with phase change material (RT58) in southern India climatic conditions
    Sahu, Susant Kumar
    Natarajan, Sendhil Kumar
    Singh, K. Arjun
    Suraparaju, Subbarama Kousik
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (11) : 2635 - 2646
  • [24] Experimental investigation of modified solar still coupled with high-frequency ultrasonic vaporizer and phase change material capsules
    Abed, Akram H.
    Hoshi, Hisham Assi
    Jabal, Mohammed Hassan
    CASE STUDIES IN THERMAL ENGINEERING, 2021, 28
  • [25] Enhancing solar still productivity using phase change material: Experimental investigation under the climatic conditions of Benguerir, Morocco
    Elmghari, Naouar
    Rachidi, Mohammed Badr
    Salihi, Mustapha
    Chebak, Ahmed
    Al-Dahhan, Muthanna H.
    Chhiti, Younes
    APPLIED THERMAL ENGINEERING, 2025, 269
  • [26] Effect of phase change material on concentric circular tubular solar still-Integration meets enhancement
    Arunkumar, T.
    Kabeel, A. E.
    DESALINATION, 2017, 414 : 46 - 50
  • [27] Experimental investigation on the performance improvement of tubular solar still using floating black sponge layer
    Mohamed Abdelgaied
    Khalid Harby
    Amr Eisa
    Environmental Science and Pollution Research, 2021, 28 : 34968 - 34978
  • [28] Experimental investigation on the performance improvement of tubular solar still using floating black sponge layer
    Abdelgaied, Mohamed
    Harby, Khalid
    Eisa, Amr
    ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2021, 28 (26) : 34968 - 34978
  • [29] Experimental investigation of thermal performance of indirect mode solar dryer with phase change material for banana slices
    Singh, Dheerandra
    Mall, Prashant
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2024, 46 (01) : 15268 - 15285
  • [30] Improving the trays solar still performance using reflectors and phase change material with nanoparticles
    Abdullah, A. S.
    Essa, F. A.
    Ben Bacha, Habib
    Omara, Z. M.
    JOURNAL OF ENERGY STORAGE, 2020, 31