Experimental study on cooling heat transfer performance of supercritical CO2 in zigzag printed circuit heat exchanger

The zigzag printed circuit heat exchanger (PCHE) is promising as the precooler in the application of supercritical CO2 (S-CO2) Brayton cycle. In this study, the experimental investigation is conducted to explore the heat transfer performance of supercritical CO2 in the mini channels of zigzag PCHE. The experimental range of pressure, temperature and mass flux is 7.5-9.0MPa, 50-90 degrees C and 300-600kg/(m(2)center dot s), respectively. The structural parameters of diameter, pitch, and bend angle are D=2.0mm, L-p = 7.24mm and theta = 40 degrees, respectively. The effects of system pressure, inlet temperature, and mass flux on the heat transfer performance of supercritical CO2 are investigated by measuring multiple temperature points along the zigzag channel. The results show that the heat transfer coefficient exhibits a higher level near the pseudocritical region due to the dramatic thermophysical properties variation of supercritical CO2. Meanwhile, both the change of mass flux and pressure have a significant influence on the S-CO2 heat transfer coefficient, while the effect of inlet temperature is relatively small. Furthermore, the comparison is conducted between the existing heat transfer correlations and the experimental results. Four new cooling heat transfer correlations are proposed and compared by considering the effect of velocity change and cross-sectional thermophysical property variation on heat transfer performance. It is found that adding variates to the correlation can improve the prediction accuracy of the results while iterative calculation becomes more difficult. In order to improve the robustness and prediction accuracy, it is determined to choose the correlation without the density form, which predict 91.5% of the experimental data within & PLUSMN;25% error band.