Design of an Automatic Ground Cleaning Machine for Dedusting Rooms of Chicken Houses

被引:2
|
作者
Yin, Yiting [1 ]
Diao, Ailin [1 ]
Li, Ziyi [1 ]
Wang, Qi [1 ]
Liu, Shuguang [1 ]
机构
[1] China Agr Univ, Yantai Inst, 2006, Binhai Mid-Rd,High-Tech Zone, Yantai 264670, Peoples R China
来源
AGRICULTURE-BASEL | 2023年 / 13卷 / 06期
关键词
facility farming; chicken house; dedusting room; ground cleaning machine; automatic cleaning; dedusting wall; PARTICULATE MATTER; EMISSIONS; DISPERSION; HEALTH;
D O I
10.3390/agriculture13061231
中图分类号
S3 [农学(农艺学)];
学科分类号
0901 ;
摘要
In this paper, we designed an automatic ground cleaning machine for the dedusting rooms of chicken houses to replace the manual daily cleaning of dust particles and fluff. The machine mainly comprised a power system, control system, frame and walking structure, ground cleaning system, and dedusting system. The automatic movement of the machine body in two vertical directions without turning, lifting, and lowering of the sweeper; the retraction and expansion of the sweeper support arm; the reciprocating movement of the sweeper relative to the machine body; and the timely separation of the dust particles and fluff from gas mixtures were achieved. Parameter optimization experiments on the machine were performed using a quadratic general rotary combination design considering the movement speed, rotation speed of the sweeper, and distance between the suction head nozzle and ground as experimental factors. The regression equations describing the relationship between the three experimental factors and the dust particle removal rate and fluff removal rate were obtained using Design-Expert 12 software, adequately reflecting the impact of the three experimental factors on the two experimental indexes. Further parameter optimization was conducted to obtain the optimized parameter combination at the same weight as the two experimental indexes: movement speed of 0.1 m/s, rotation speed of the sweeper of 198 r/min, and distance between the suction head nozzle and ground of 12 mm. The performance experiment on the machine was conducted using the optimized parameter combination, yielding a dust particle removal rate of 90.7% and fluff removal rate of 91.7%. The experimental results show that the machine exhibits good performance and stable operation, meeting the daily cleaning needs of large-, medium-, and small-scale rectangular dedusting rooms of chicken houses.
引用
收藏
页数:22
相关论文
共 50 条
  • [41] Research and Design of Streetlight Lamp Pole Automatic Cleaning Device
    Fu, Mengyu
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON EDUCATION, MANAGEMENT, INFORMATION AND MECHANICAL ENGINEERING (EMIM 2017), 2017, 76 : 976 - 980
  • [42] Design and Analysis of an Automatic Unit for Cleaning Smooth Surfaces.
    Volkov, A.N.
    D'yachenko, V.A.
    Trudy LPI, 1982, (382): : 42 - 47
  • [43] Design of automatic control system for intelligent cleaning robot of condenser
    Yan, Tao
    Sun, Lijun
    International Journal of Mechatronics and Applied Mechanics, 2019, 2 (06): : 109 - 114
  • [44] Design and Research on a Automatic Cleaning Device of Wind Turbine Blades
    Lv, Tai
    Wang, Qiang
    RENEWABLE ENERGY AND ENVIRONMENTAL TECHNOLOGY, PTS 1-6, 2014, 448-453 : 3472 - 3475
  • [45] Development and test of fully automatic film-cleaning machine for Chinese greenhouses
    Li T.
    Dong G.
    Shi G.
    Wei M.
    Wang C.
    Wu Y.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2024, 40 (01): : 238 - 246
  • [46] Research and Design of an Automatic Grading Device in Chicken Wing Weight
    LiXin Zhao
    JingJing Xu
    ChengYi Wang
    XiaoLing Ding
    Fei Li
    FaDong Hou
    Wireless Personal Communications, 2018, 102 : 769 - 782
  • [47] Design of an Automatic Lotus Plumule Removing Machine
    Ma, Qiucheng
    Lin, Keqiang
    Ni, Binqing
    Lu, Ange
    Song, Yin
    Liu, Luxiang
    Liu, Yu
    Tang, Xinzi
    2019 25TH IEEE INTERNATIONAL CONFERENCE ON AUTOMATION AND COMPUTING (ICAC), 2019, : 295 - 299
  • [48] Design of automatic control systems for machine tools
    Popov A.P.
    Russian Engineering Research, 2014, 34 (04) : 243 - 245
  • [49] Control System Design of Automatic Feeding Machine
    Chen, Shaoke
    MECHATRONICS AND APPLIED MECHANICS, PTS 1 AND 2, 2012, 157-158 : 466 - 471
  • [50] Automatic Chain Cold Drawing Machine Design
    Wang, Zhenhua
    2016 INTERNATIONAL CONFERENCE ON NETWORK AND INFORMATION SYSTEMS FOR COMPUTERS (ICNISC), 2016, : 180 - 183