Strategies to Reduce Purge Losses in Meat Products Stuffed in Plastic Casings

Two different meat emulsions were prepared with different physical stability: R-1 with 6.28 +/- 1.13% total expressible fluid and R-2 with 17.7 +/- 1.48%. The emulsions were placed in plastic casings at three different surface tensions (ST), expressed as contact angle, and three distinct overstuffing percentages (OS). The stuffed samples were cooked in an industrial oven. After cooling, purge losses (PL) and texture profile analysis (TPA) were measured. The reduced surface tension of the plastic casings significantly decreased the PL of both recipes. In the case of R-2, a combination of high OS and low ST was necessary to reduce PL in a 60%. In the case of TPA, OS had a statistical influence on parameters like chewiness, cohesiveness, and hardness. Plastic casings with different surface tension (to increase adherence of meat emulsion to the casing) stuffed at different levels of overstuffing percentages (to reduce free space between meat emulsion and casing) represent a potential tool to reduce PL of products based on low stability meat emulsions.