Performance of Electromagnetic Properties of Carbon Fiber Reinforced and AuNPs Functionalized MWCNTs Doped Hybride Composites

被引:0
|
作者
Ozkan, Vildan [1 ]
机构
[1] Iskenderun Tech Univ, Fac Engn & Nat Sci, Iskenderun, Hatay, Turkiye
关键词
MWCNTs; carbon fiber; AuNPs/MWCNTs; radar absorption; composite material; MICROWAVE; ABSORPTION; NANOPARTICLES; NANOTUBES; BAND;
D O I
10.1149/2162-8777/ad2aec
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The purpose of this article is to compare the electromagnetic absorption properties of carbon fiber layer composite materials produced separately using Au particles doped MWCNT added epoxy with pure MWCNT added epoxy resin. This new material, produced using MWCNT doped with Au particles, increases its radar absorption capability. And therefore the as-prepared electromagnetic absorber demonstrates enormous potential in future military and aviation applications. Multilayer composite materials, consisting of Au/MWCNT doped epoxy, MWCNT doped epoxy and pure epoxy, were produced by vacuum infusion method. Electromagnetic absorbing properties of the produced materials were determined with the Agilent brand 2-Port PNA-L Network Analyzer device by conducting transmission/reflection measurements in the frequency range of 3-18 GHz. The electromagnetic absorbing properties of the produced composite materials were taken in two different measurements, both with and without metal plate. Measurements were made using two horn antennas. Show that the produced MWCNT doped and Au/MWCNT doped carbon fiber laminated composite material has good absorption behavior when used with metallic sheets and is good for RADOM applications at many points at 3-18 GHz. Firstly, multilayer composite materials consisting of AuNP/MWCNT-doped epoxy, MWCNT-doped epoxy and pure epoxy were produced by the vacuum bagging method.The fiber reinforcement of each composite material was also selected as carbon fiber.Afterwards, measurements of composite materials produced in different configurations were carried out in the 3-8 GHz frequency range.The most important factor in choosing this range is that different new wireless communication bands are in this range.In conclusion; Among the composite materials measured; It has been determined that AuNP/MWCNT-doped epoxy and MWCNT-doped epoxies have much higher radar absorption than pure epoxy.
引用
收藏
页数:5
相关论文
共 50 条
  • [21] Influence of carbon fiber nickel electroplating on the electromagnetic interference shielding and mechanical properties of carbon fiber reinforced polyamide 6 composites
    Wang, Wenhao
    Zhai, Zhanyu
    Liu, Jinglin
    Wang, Yilei
    Yang, Zhonghao
    POLYMER COMPOSITES, 2023, 44 (12) : 8838 - 8848
  • [22] Electromagnetic properties of carbon nanofiber reinforced concrete and comparison with carbon fiber reinforced concrete
    Chen, Tao
    Wang, Zhihang
    Zhang, Chao
    Wang, Chao
    Ge, Tao
    Du, Yuhang
    Nie, Liangxue
    Bai, Erlei
    FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES, 2025,
  • [23] Mechanical properties of carbon fiber felt reinforced composites
    Kim, J
    Shioya, M
    Kaneko, J
    Kido, M
    SEN-I GAKKAISHI, 2001, 57 (11) : 317 - 325
  • [24] Carbon Fiber Reinforced Composites: Their Structural And Thermal Properties
    Cheng, Jingquan
    Yang, Dehua
    MODERN TECHNOLOGIES IN SPACE- AND GROUND-BASED TELESCOPES AND INSTRUMENTATION, 2010, 7739
  • [25] Microcreep properties of carbon fiber reinforced resin composites
    Li Y.
    Pan J.
    Lang F.
    Yang S.
    Jiang A.
    Li J.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (08): : 1861 - 1867
  • [26] MECHANICAL PROPERTIES TESTING OF CARBON FIBER REINFORCED COMPOSITES
    Fu M.
    Yu X.
    Ying S.
    International Journal of Mechatronics and Applied Mechanics, 2022, 2022 (11): : 286 - 294
  • [27] Orientation of carbon fiber in magnesium-doped hydroxyapatite and its effect on mechanical and tribological properties of carbon fiber reinforced composites
    Zhao, Xueni
    Guan, Jinxin
    Yang, Zhi
    Liu, Yifo
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 306
  • [28] The effect of MWCNTs on the microwave electromagnetic properties of ferrite-MWCNTs composites
    Wang, Lixi
    Zhang, Jing
    Zhang, Qitu
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (03) : 1895 - 1899
  • [29] Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites
    Celik, Okan
    Yasar, Abdulkadir
    Karacor, Berkay
    POLYMER COMPOSITES, 2023, 44 (06) : 3509 - 3521
  • [30] Electromagnetic Shielding Effectiveness and Impact Test Performance of Carbon Fiber Reinforced Polymer Composites with Hematite and Goethite
    Eken, Taha Yasin
    Kaykilarli, Cantekin
    Kucukelyas, Burak
    Tabakcioglu, Mehmet Baris
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2024, 309 (02)