Effect of casting temperature on halo in the solidification microstructure of direct-chill casting Al-16.5Si-4.5Cu-0.6Mg-0.1Zr alloys

被引：4
|
作者：
Li, Chunyu [1 ]
Liu, Fang [1 ]
Yu, Fuxiao [1 ]
Qiao, Hairong [1 ]
Zheng, Dongpu [1 ]
机构：
[1] Northeastern Univ, Sch Metallurgy, Shenyang 110819, Peoples R China
来源：
MATERIALS LETTERS | 2023年 / 337卷
关键词：
Al -Si alloy; Crystal growth; Halo; Cast; Solidification;
D O I：
10.1016/j.matlet.2022.133779
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of casting temperature on the halo structure of direct-chill (DC) casting Al-16.5Si-4.5Cu-0.6Mg-0.1Zr alloys was investigated. The results indicated that the microstructure consists of fine primary Si, alpha-Al dendrite halo, and fine fibrous coupled eutectic structure, Al2Cu, and Al8FeMg3Si6 phase. The formation of halos was systematically analyzed. The temperature gradient at the solid-liquid interface front played an essential role in the development and growth of the halo. As the casting temperature elevated, the temperature gradient of the solid-liquid interface front increased, the solid-liquid interface became stable, the alpha-Al dendrite halo was less developed, the number of large-sized Si atomic clusters in the melt decreased and the growth of primary Si was inhibited.
引用
收藏
页数：5
相关论文
共 50 条
  • [31] Effect of Direct Chill Casting Process Parameters on the Microstructure and Macrosegregation of Mg-Al-Zn Ingot
    Zheng, Xingwei
    Luo, Peng
    Dong, Jie
    Ding, Wenjiang
    MATERIALS TRANSACTIONS, 2017, 58 (08) : 1197 - 1202
  • [32] The effect of Cu content on the level of microporosity in Al-Si-Cu-Mg casting alloys
    Cáceres, CH
    Djurdjevic, MB
    Stockwell, TJ
    Sokolowski, JH
    SCRIPTA MATERIALIA, 1999, 40 (05) : 631 - 637
  • [33] Influence of Tin Addition on the Microstructure and Mechanical Properties of Al-Si-Cu-Mg and Al-Si-Mg Casting Alloys
    A.M.A. Mohamed
    F.H. Samuel
    A.M. Samuel
    H.W. Doty
    S. Valtierra
    Metallurgical and Materials Transactions A, 2008, 39 : 490 - 501
  • [34] Influence of tin addition on the microstructure and mechanical properties of Al-Si-Cu-Mg and Al-Si-Mg casting alloys
    Mohamed, A. M. A.
    Samuel, F. H.
    Samuel, A. M.
    Doty, H. W.
    Valtierra, S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (03): : 490 - 501
  • [35] Effects of casting conditions on microstructure and mechanical properties of Al-7%Si-0.3%Mg-0.1%Sb casting alloys
    Adachi, Mitsuru
    Oishi, Akira
    Moribe, Atsushi
    Tanaka, Ryoji
    Keikinzoku/Journal of Japan Institute of Light Metals, 1988, 38 (08): : 479 - 484
  • [36] Microstructure and mechanical properties of aged Al-4.5Cu-0.6Mg(-0.3Si) alloys
    School of Materials Science and Engineering, Shenyang University of Technology, Shenyang, China
    Cailiao Rechuli Xuebao, 6 (36-40):
  • [37] Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys
    Tao Lu
    Ye Pan
    Ji-li Wu
    Shi-wen Tao
    Yu Chen
    InternationalJournalofMineralsMetallurgyandMaterials, 2015, 22 (04) : 405 - 410
  • [38] Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys
    Lu, Tao
    Pan, Ye
    Wu, Ji-li
    Tao, Shi-wen
    Chen, Yu
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2015, 22 (04) : 405 - 410
  • [39] Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys
    Tao Lu
    Ye Pan
    Ji-li Wu
    Shi-wen Tao
    Yu Chen
    International Journal of Minerals, Metallurgy, and Materials, 2015, 22 : 405 - 410
  • [40] Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy (vol 36, pg 1956, 2005)
    Eskin, DG
    Savran, VI
    Katgerman, L
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (09): : 2561 - 2561
12345