Verification of stress transfer mechanism in fatigue crack growth under overload

被引：5

作者：

Wang, Chen ^{[1
]}

Chen, Rong ^{[1
]}

Guo, Su-Juan ^{[1
]}

Zhu, Ming-Liang ^{[1
]}

Xuan, Fu-Zhen ^{[1
]}

机构：

[1] East China Univ Sci & Technol, Sch Mech & Power Engn, Key Lab Pressure Syst & Safety, Minist Educ, Shanghai 200237, Peoples R China

来源：

THEORETICAL AND APPLIED FRACTURE MECHANICS | 2023年 / 128卷

基金：

中国国家自然科学基金;

关键词：

Fatigue crack growth; Overload effect; Stress transfer; Crack tip blunting; Crack closure; MESH REFINEMENT; CLOSURE; PROPAGATION;

D O I：

10.1016/j.tafmec.2023.104104

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Cyclic plastic finite element modeling was carried out to investigate effect of overload on fatigue crack growth under blunting and no-blunting mechanisms at different overload ratios. The stress transfer mechanism was verified and was found more obvious in the case of crack blunting though its effect was time-limited. The level of crack closure varied periodically due to gradual relaxation of compressive residual stress during crack propagation. Both the overload plastic zone and the overload affected zone were linearly correlated with overload ratio, and an overload ratio value of 1.1 was the best choice for studying overload effect.

引用

页数：9

共 50 条

[31] Effect of crack-tip deformation on fatigue crack growth: A comparative study under overload/underload conditions
Liang, Hang
Zhan, Rui
Wang, Dongpo
Deng, Caiyan
Xu, Xiaohan
Guo, Baichen
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 118
[32] Equivalent crack growth model for correlation and prediction of fatigue crack growth under different stress ratios
Kwofie, Samuel
Mensah-Darkwa, Kwadwo
INTERNATIONAL JOURNAL OF FATIGUE, 2022, 163
[33] THE EFFECT OF AN OVERLOAD ON THE RATE OF FATIGUE-CRACK PROPAGATION UNDER PLANE-STRESS CONDITIONS
BAO, H
MCEVILY, AJ
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (07): : 1725 - 1733
[34] Mechanism of fatigue-crack growth under compressive external stresses
Shabanov A.P.
Journal of Applied Mechanics and Technical Physics, 2005, 46 (6) : 861 - 866
[35] Effects of specimen size and stress ratio on fatigue crack growth after a single tensile overload
Gadallah, Ramy
Murakawa, Hidekazu
Shibahara, Masakazu
OCEAN ENGINEERING, 2022, 261
[36] CONSIDERATION ON FATIGUE CRACK GROWTH THRESHOLDS UNDER NEGATIVE STRESS RATIO
Hasegawa, Kunio
Usami, Saburo
Lacroix, Valery
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 1, 2019,
[37] FATIGUE CRACK GROWTH FOR FERRITIC STEEL UNDER NEGATIVE STRESS RATIO
Yamaguchi, Yoshihito
Hasegawa, Kunio
Li, Yinsheng
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 1A, 2019,
[38] FATIGUE CRACK GROWTH IN PMMA AND RIGID PVC UNDER BIAXIAL STRESS
LEEVERS, PS
CULVER, LE
RADON, JC
ENGINEERING FRACTURE MECHANICS, 1979, 11 (03) : 487 - 498
[39] An analysis of mode I fatigue crack growth under biaxial stress
Endo, M.
Sakai, H.
Mcevily, A. J.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2006, 20 (25-27): : 3824 - 3829
[40] Fatigue Crack Growth for Ferritic Steel Under Negative Stress Ratio
Yamaguchi, Yoshihito
Hasegawa, Kunio
Li, Yinsheng
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2020, 142 (04):

← 1 2 3 4 5 →